[PATCH v2 3/6] Documentation: devicetree: net: add NS2 bindings to amac
From: Jon Mason <hidden>
Date: 2016-10-28 20:57:29
Also in:
linux-devicetree, lkml, netdev
Subsystem:
networking drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Signed-off-by: Jon Mason <redacted> --- Documentation/devicetree/bindings/net/brcm,amac.txt | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/brcm,amac.txt b/Documentation/devicetree/bindings/net/brcm,amac.txt
index ba5ecc1..f2b194e 100644
--- a/Documentation/devicetree/bindings/net/brcm,amac.txt
+++ b/Documentation/devicetree/bindings/net/brcm,amac.txt@@ -2,11 +2,12 @@ Broadcom AMAC Ethernet Controller Device Tree Bindings ------------------------------------------------------------- Required properties: - - compatible: "brcm,amac" or "brcm,nsp-amac" + - compatible: "brcm,amac", "brcm,nsp-amac", or "brcm,ns2-amac" - reg: Address and length of the GMAC registers, Address and length of the GMAC IDM registers + Address and length of the NIC Port Manager registers (optional) - reg-names: Names of the registers. Must have both "amac_base" and - "idm_base" + "idm_base". "nicpm_base" is optional (required for NS2) - interrupts: Interrupt number Optional properties:
--
2.7.4