Hi,

On Wednesday, July 13, 2016 04:37:31 PM Arnd Bergmann wrote:

On Wednesday, July 13, 2016 12:59:23 PM CEST Bartlomiej Zolnierkiewicz wrote:

quoted

On Friday, July 08, 2016 10:23:48 PM Arnd Bergmann wrote:

quoted

On Friday, July 8, 2016 5:24:41 PM CEST Bartlomiej Zolnierkiewicz wrote:

quoted

This patch disables deprecated IDE subsystem in assabet_defconfig
(no IDE host drivers are selected in this config so there is no
valid reason to enable IDE subsystem itself).

Cc: Dmitry Eremin-Solenikov <redacted>
Signed-off-by: Bartlomiej Zolnierkiewicz <redacted>

I think the series makes a lot of sense. I have checked your assertions
in the changelogs and found no flaws in your logic, so I think we should
take them all through arm-soc unless there are other concerns.

Thank you.

Should I resend everything or just patches that were not reposted yet
(the ones that were marked as RFT initially and got no feedback)?

I'd be fine with just getting a pull request with all the patches that
had no negative feedback and that were not already applied (if any).

Here it is (sorry for taking so long).

The following changes since commit 07d9a380680d1c0eb51ef87ff2eab5c994949e69:

  Linux 4.9-rc2 (2016-10-23 17:10:14 -0700)

are available in the git repository at:

  https://github.com/bzolnier/linux.git v4.9-rc2-arm-configs-pata

for you to fetch changes up to bc9c6cc857849ec0d83bd13c1812bae9345dc553:

  arm: spitz_defconfig: convert to use libata PATA drivers (2016-10-26 18:43:33 +0200)

----------------------------------------------------------------
Bartlomiej Zolnierkiewicz (16):
      arm: assabet_defconfig: disable IDE subsystem
      arm: badge4_defconfig: disable IDE subsystem
      arm: cerfcube_defconfig: disable IDE subsystem
      arm: lart_defconfig: disable IDE subsystem
      arm: mainstone_defconfig: disable IDE subsystem
      arm: shannon_defconfig: disable IDE subsystem
      arm: collie_defconfig: convert to use libata PATA drivers
      arm: omap1_defconfig: convert to use libata PATA drivers
      arm: am200epdkit_defconfig: convert to use libata PATA drivers
      arm: corgi_defconfig: convert to use libata PATA drivers
      arm: h3600_defconfig: convert to use libata PATA drivers
      arm: ixp4xx_defconfig: convert to use libata PATA drivers
      arm: jornada720_defconfig: convert to use libata PATA drivers
      arm: netwinder_defconfig: convert to use libata PATA drivers
      arm: s3c2410_defconfig: convert to use libata PATA drivers
      arm: spitz_defconfig: convert to use libata PATA drivers

 arch/arm/configs/am200epdkit_defconfig |  5 +++--
 arch/arm/configs/assabet_defconfig     |  1 -
 arch/arm/configs/badge4_defconfig      |  2 --
 arch/arm/configs/cerfcube_defconfig    |  1 -
 arch/arm/configs/collie_defconfig      |  5 +++--
 arch/arm/configs/corgi_defconfig       |  7 +++----
 arch/arm/configs/h3600_defconfig       |  5 +++--
 arch/arm/configs/ixp4xx_defconfig      |  9 +++++----
 arch/arm/configs/jornada720_defconfig  |  5 +++--
 arch/arm/configs/lart_defconfig        |  2 --
 arch/arm/configs/mainstone_defconfig   |  1 -
 arch/arm/configs/netwinder_defconfig   |  7 ++++---
 arch/arm/configs/omap1_defconfig       |  4 ++--
 arch/arm/configs/s3c2410_defconfig     | 10 +++-------
 arch/arm/configs/shannon_defconfig     |  1 -
 arch/arm/configs/spitz_defconfig       |  8 +++-----
 16 files changed, 32 insertions(+), 41 deletions(-)