[PATCH v5 1/9] Documentation: dt-bindings: Document STM32 EXTI controller bindings
From: Alexandre TORGUE <hidden>
Date: 2016-09-09 14:43:04
Also in:
linux-devicetree, linux-gpio, lkml
Subsystem:
irqchip drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Thomas Gleixner, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com> Signed-off-by: Alexandre TORGUE <redacted>
diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt
new file mode 100644
index 0000000..6e7703d
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt@@ -0,0 +1,20 @@ +STM32 External Interrupt Controller + +Required properties: + +- compatible: Should be "st,stm32-exti" +- reg: Specifies base physical address and size of the registers +- interrupt-controller: Indentifies the node as an interrupt controller +- #interrupt-cells: Specifies the number of cells to encode an interrupt + specifier, shall be 2 +- interrupts: interrupts references to primary interrupt controller + +Example: + +exti: interrupt-controller at 40013c00 { + compatible = "st,stm32-exti"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x40013C00 0x400>; + interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>; +};
--
1.9.1