[PATCH 6/7] arm64: dts: exynos: Add dts file for Exynos5433-based TM2 board
From: cw00.choi@samsung.com (Chanwoo Choi)
Date: 2016-08-17 07:36:47
Also in:
linux-devicetree, linux-samsung-soc, lkml
Hi Krzysztof, On 2016? 08? 17? 15:42, Krzysztof Kozlowski wrote:
On 08/16/2016 08:35 AM, Chanwoo Choi wrote:quoted
This patch adds the Device Tree source for Exynos5433-based Samsung TM2 board. This board fully support the all things for mobile target. This patch supports the following devices: 1. basic SoC - Initial booting for Samsung Exynos5433 SoC - DRAM LPDDR3 (3GB) - eMMC (32GB) - ARM architecture timer 2. power management devices - Sasmung S2MPS13 PMIC for the power supply - CPUFREQ for big.LITTLE cores - TMU for big.LITTLE cores and GPU - ADC with thermistor to measure the temperature of AP/Battery/Charger - Maxim MAX77843 Interface PMIC (MUIC/Fuel-gauge/Charger/Haptic/LED/Regulator) 3. sound devices - I2S for sound bus - LPASS for sound power control - Wolfson WM5110 for sound codec - Maxim MAX98504 for speaker amplifier - TM2 ASoC Machine device driver node 3. display devices - DECON, DSI and MIC for the panel output 4. usb devices - USB 3.0 DRD (Dual Role Device) - USB 3.0 Host controller 5. storage devices - MSHC (obile Storae Host Controller) for eMMC deviceMobile Storage
OK.
quoted
6. misc devices - gpio-keys (power, volume up/down, home key) - PWM (Pulse Width Modulation Timer) Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Joonyoung Shim <redacted> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Jonghwa Lee <redacted> Signed-off-by: Beomho Seo <redacted> Signed-off-by: Jaewon Kim <redacted> Signed-off-by: Hyungwon Hwang <redacted> Signed-off-by: Inha Song <redacted> Signed-off-by: Ingi kim <redacted> Signed-off-by: Krzysztof Kozlowski <redacted> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andrzej Hajda <redacted> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> --- .../bindings/arm/samsung/samsung-boards.txt | 1 + arch/arm64/boot/dts/exynos/Makefile | 5 +- arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 1003 ++++++++++++++++++++ 3 files changed, 1008 insertions(+), 1 deletion(-) create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tm2.dtsdiff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt index 0ea7f14ef294..c704b4bf6137 100644 --- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt@@ -15,6 +15,7 @@ Required root node properties: - "samsung,xyref5260" - for Exynos5260-based Samsung board. - "samsung,smdk5410" - for Exynos5410-based Samsung SMDK5410 eval board. - "samsung,smdk5420" - for Exynos5420-based Samsung SMDK5420 eval board. + - "samsung,tm2" - for Exynos5333-based Samsung TM2 board. - "samsung,sd5v1" - for Exynos5440-based Samsung board. - "samsung,ssdk5440" - for Exynos5440-based Samsung board.diff --git a/arch/arm64/boot/dts/exynos/Makefile b/arch/arm64/boot/dts/exynos/Makefile index 50c9b9383cfa..7ddea53769a7 100644 --- a/arch/arm64/boot/dts/exynos/Makefile +++ b/arch/arm64/boot/dts/exynos/Makefile@@ -1,4 +1,7 @@ -dtb-$(CONFIG_ARCH_EXYNOS) += exynos7-espresso.dtb +dtb-$(CONFIG_ARCH_EXYNOS) += \ + exynos5433-tm2.dtb \ + exynos5433-tm2e.dtb \ + exynos7-espresso.dtb always := $(dtb-y) subdir-y := $(dts-dirs)diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts new file mode 100644 index 000000000000..3e497b0d0015 --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts@@ -0,0 +1,1003 @@ +/* + * SAMSUNG Exynos5433 TM2 board device tree source + * + * Copyright (c) 2016 Samsung Electronics Co., Ltd. + * + * Device tree source file for Samsung's TM2 board which is based on + * Samsung Exynos5433 SoC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include "exynos5433.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "Samsung TM2 board"; + compatible = "samsung,exynos5433-tm2", "samsung,exynos5433"; + + aliases { + i2c0 = &hsi2c_0; + i2c1 = &hsi2c_1; + i2c2 = &hsi2c_2; + i2c3 = &hsi2c_3; + i2c4 = &hsi2c_4; + i2c5 = &hsi2c_5; + i2c6 = &hsi2c_6; + i2c7 = &hsi2c_7; + i2c8 = &hsi2c_8; + i2c9 = &hsi2c_9; + i2c10 = &hsi2c_10; + i2c11 = &hsi2c_11; + mshc0 = &mshc_0; + mshc1 = &mshc_1; + mshc2 = &mshc_2; + pinctrl0 = &pinctrl_alive; + pinctrl1 = &pinctrl_aud; + pinctrl2 = &pinctrl_cpif; + pinctrl3 = &pinctrl_ese; + pinctrl4 = &pinctrl_finger; + pinctrl5 = &pinctrl_fsys; + pinctrl6 = &pinctrl_imem; + pinctrl7 = &pinctrl_nfc; + pinctrl8 = &pinctrl_peric; + pinctrl9 = &pinctrl_touch; + serial0 = &serial_0; + serial1 = &serial_1; + serial2 = &serial_2; + serial3 = &serial_3; + spi0 = &spi_0; + spi1 = &spi_1; + spi2 = &spi_2; + spi3 = &spi_3; + spi4 = &spi_4; + usbdrdphy0 = &usbdrd30_phy; + }; + + chosen { + stdout-path = &serial_1; + }; + + memory at 20000000 { + device_type = "memory"; + reg = <0x0 0x20000000 0x0 0xc0000000>; + }; + + gpio_keys { + compatible = "gpio-keys"; + + power_key { + gpios = <&gpa2 7 1>;s/1/GPIO_ACTIVE_LOW/
OK.
quoted
+ linux,code = <KEY_POWER>; + label = "power key"; + debounce-interval = <10>; + gpio-key,wakeup; + }; + + volume_up_key { + gpios = <&gpa2 0 1>;s/1/GPIO_ACTIVE_LOW/
OK.
quoted
+ linux,code = <KEY_VOLUMEUP>; + label = "volume-up key"; + debounce-interval = <10>; + }; + + volume_down_key { + gpios = <&gpa2 1 1>;s/1/GPIO_ACTIVE_LOW/
OK.
quoted
+ linux,code = <KEY_VOLUMEDOWN>; + label = "volume-down key"; + debounce-interval = <10>; + }; + + homepage_key { + gpios = <&gpa0 3 1>;s/1/GPIO_ACTIVE_LOW/
OK.
quoted
+ linux,code = <KEY_MENU>; + label = "homepage key"; + debounce-interval = <10>; + }; + }; + + i2c_max98504: i2c-gpio-0 { + compatible = "i2c-gpio"; + gpios = <&gpd0 1 GPIO_ACTIVE_HIGH /* SPK_AMP_SDA */ + &gpd0 0 GPIO_ACTIVE_HIGH /* SPK_AMP_SCL */ >; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + max98504: max98504 at 31 { + compatible = "maxim,max98504"; + reg = <0x31>; + maxim,rx-path = <1>; + maxim,tx-path = <1>; + maxim,tx-channel-mask = <3>; + maxim,tx-channel-source = <2>; + }; + }; + + sound { + compatible = "samsung,tm2-audio"; + audio-codec = <&wm5110>; + i2s-controller = <&i2s0>; + audio-amplifier = <&max98504>; + mic-bias-gpios = <&gpr3 2 0>;s/0/GPIO_ACTIVE_HIGH/
OK.
quoted
+ model = "wm5110"; + samsung,audio-routing = + /* Headphone */ + "HP", "HPOUT1L", + "HP", "HPOUT1R", + + /* Speaker */ + "SPK", "SPKOUT", + "SPKOUT", "HPOUT2L", + "SPKOUT", "HPOUT2R", + + /* Receiver */ + "RCV", "HPOUT3L", + "RCV", "HPOUT3R"; + status = "okay"; + }; +}; + +&adc { + vdd-supply = <&ldo3_reg>; + status = "okay"; + + thermistor-ap { + compatible = "ntc,ncp03wf104"; + pullup-uv = <1800000>; + pullup-ohm = <100000>; + pulldown-ohm = <0>; + io-channels = <&adc 0>; + }; + + thermistor_battery: thermistor-battery { + compatible = "ntc,ncp03wf104"; + pullup-uv = <1800000>; + pullup-ohm = <100000>; + pulldown-ohm = <0>; + io-channels = <&adc 1>; + #thermal-sensor-cells = <0>; + }; + + thermistor-charger { + compatible = "ntc,ncp03wf104"; + pullup-uv = <1800000>; + pullup-ohm = <100000>; + pulldown-ohm = <0>; + io-channels = <&adc 2>; + }; +}; + +&cpu0 { + cpu-supply = <&buck3_reg>; +}; + +&cpu4 { + cpu-supply = <&buck2_reg>; +}; + +&decon { + status = "okay"; + iommu-reserved-mapping = <0x20000000 0x20000000 0xc0000000>; + + i80-if-timings { + }; +}; + +&dsi { + status = "okay"; + vddcore-supply = <&ldo6_reg>; + vddio-supply = <&ldo7_reg>; + samsung,pll-clock-frequency = <24000000>; + pinctrl-names = "default"; + pinctrl-0 = <&te_irq>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 1 { + reg = <1>; + + dsi_out: endpoint { + samsung,burst-clock-frequency = <512000000>; + samsung,esc-clock-frequency = <16000000>; + }; + }; + }; +}; + +&hsi2c_0 { + status = "okay"; + clock-frequency = <2500000>; + + s2mps13_pmic at 66 { + compatible = "samsung,s2mps13-pmic"; + interrupt-parent = <&gpa0>; + interrupts = <7 0>;s/0/IRQ_TYPE_NONE/
OK.
quoted
+ reg = <0x66>; + wakeup;I think there is no such "wakeup" property.
I'll remove it.
quoted
+ samsung,s2mps11-wrstbi-ground; + + s2mps13_osc: clocks { + compatible = "samsung,s2mps13-clk"; + #clock-cells = <1>; + clock-output-names = "s2mps13_ap", "s2mps13_cp", + "s2mps13_bt"; + }; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "VDD_ALIVE_0.9V_AP"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "VDDQ_MMC2_2.8V_AP"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo3_reg: LDO3 { + regulator-name = "VDD1_E_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "VDD10_MIF_PLL_1.0V_AP"; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo5_reg: LDO5 { + regulator-name = "VDD10_DPLL_1.0V_AP"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo6_reg: LDO6 { + regulator-name = "VDD10_MIPI2L_1.0V_AP"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo7_reg: LDO7 { + regulator-name = "VDD18_MIPI2L_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo8_reg: LDO8 { + regulator-name = "VDD18_LLI_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo9_reg: LDO9 { + regulator-name = "VDD18_ABB_ETC_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo10_reg: LDO10 { + regulator-name = "VDD33_USB30_3.0V_AP"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo11_reg: LDO11 { + regulator-name = "VDD_INT_M_1.0V_AP"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo12_reg: LDO12 { + regulator-name = "VDD_KFC_M_1.1V_AP"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + ldo13_reg: LDO13 { + regulator-name = "VDD_G3D_M_0.95V_AP"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <950000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo14_reg: LDO14 { + regulator-name = "VDDQ_M1_LDO_1.2V_AP"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo15_reg: LDO15 { + regulator-name = "VDDQ_M2_LDO_1.2V_AP"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo16_reg: LDO16 { + regulator-name = "VDDQ_EFUSE"; + regulator-min-microvolt = <1400000>; + regulator-max-microvolt = <3400000>; + regulator-always-on; + }; + + ldo17_reg: LDO17 { + regulator-name = "V_TFLASH_2.8V_AP"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo18_reg: LDO18 { + regulator-name = "V_CODEC_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo19_reg: LDO19 { + regulator-name = "VDDA_1.8V_COMP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo20_reg: LDO20 { + regulator-name = "VCC_2.8V_AP"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo21_reg: LDO21 { + regulator-name = "VT_CAM_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo22_reg: LDO22 { + regulator-name = "CAM_IO_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo23_reg: LDO23 { + regulator-name = "CAM_SEN_CORE_1.2V_AP"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1200000>; + }; + + ldo24_reg: LDO24 { + regulator-name = "VT_CAM_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo25_reg: LDO25 { + regulator-name = "CAM_SEN_A2.8V_AP"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo26_reg: LDO26 { + regulator-name = "CAM_AF_2.8V_AP"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo27_reg: LDO27 { + regulator-name = "VCC_3.0V_LCD_AP"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + ldo28_reg: LDO28 { + regulator-name = "VCC_1.8V_LCD_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo29_reg: LDO29 { + regulator-name = "VT_CAM_2.8V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + ldo30_reg: LDO30 { + regulator-name = "TSP_AVDD_3.3V_AP"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo31_reg: LDO31 { + regulator-name = "TSP_VDD_1.85V_AP"; + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + }; + + ldo32_reg: LDO32 { + regulator-name = "VTOUCH_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + ldo33_reg: LDO33 { + regulator-name = "VTOUCH_LED_3.3V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + }; + + ldo34_reg: LDO34 { + regulator-name = "VCC_1.8V_MHL_AP"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <2100000>; + }; + + ldo35_reg: LDO35 { + regulator-name = "OIS_VM_2.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo36_reg: LDO36 { + regulator-name = "VSIL_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + ldo37_reg: LDO37 { + regulator-name = "VF_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo38_reg: LDO38 { + regulator-name = "VCC_3.0V_MOTOR_AP"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + ldo39_reg: LDO39 { + regulator-name = "V_HRM_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo40_reg: LDO40 { + regulator-name = "V_HRM_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + buck1_reg: BUCK1 { + regulator-name = "VDD_MIF_0.9V_AP"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + buck2_reg: BUCK2 { + regulator-name = "VDD_EGL_1.0V_AP"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + buck3_reg: BUCK3 { + regulator-name = "VDD_KFC_1.0V_AP"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + buck4_reg: BUCK4 { + regulator-name = "VDD_INT_0.95V_AP"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + buck5_reg: BUCK5 { + regulator-name = "VDD_DISP_CAM0_0.9V_AP"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + buck6_reg: BUCK6 { + regulator-name = "VDD_G3D_0.9V_AP"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + buck7_reg: BUCK7 { + regulator-name = "VDD_MEM1_1.2V_AP"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + buck8_reg: BUCK8 { + regulator-name = "VDD_LLDO_1.35V_AP"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + buck9_reg: BUCK9 { + regulator-name = "VDD_MLDO_2.0V_AP"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + buck10_reg: BUCK10 { + regulator-name = "vdd_mem2"; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + }; + }; +}; + +&hsi2c_8 { + status = "okay"; + + max77843 at 66 { + compatible = "samsung,max77843";There is no such compatible.
It is my mistake. I'll fix it using "maxim,max77843"
quoted
+ interrupt-parent = <&gpa1>; + interrupts = <5 2>;IRQ_TYPE_EDGE_FALLING
OK.
quoted
+ reg = <0x66>; + wakeup;Ditto - wakeup.
I'll remove it.
quoted
+ + muic: max77843-muic { + compatible = "maxim,max77843-muic"; + }; + + regulators { + compatible = "maxim,max77843-regulator";BTW, It's a pity that max77843 submission was not finished. These compatibles are not documented. Also the charger driver did not reach mainline. The fuelgauge probably has wrong compatible in MFD driver.
The "max77843-regulator"[1] was merged to driver/regulator/max77693-regulator.c. [1] 9e9a08e86733d (regulator: max77693: Add support for MAX77843 device) I know the charger/fuel-gauge was not finished. I'll again post them. So, this patch don't include the charger/fuel-gauge dt node.
quoted
+ safeout1_reg: SAFEOUT1 { + regulator-name = "SAFEOUT1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <4950000>; + }; + + safeout2_reg: SAFEOUT2 { + regulator-name = "SAFEOUT2"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <4950000>; + }; + + charger_reg: CHARGER { + regulator-name = "CHARGER"; + regulator-min-microamp = <100000>; + regulator-max-microamp = <3150000>; + }; + }; + + haptic: max77843-haptic { + compatible = "maxim,max77843-haptic"; + haptic-supply = <&ldo38_reg>; + pwms = <&pwm 0 33670 0>; + pwm-names = "haptic"; + }; + }; +}; + +&hsi2c_11 { + status = "okay";What is inside? How does it work if there is no child device specified?
It is unneeded. I'll remove it.
quoted
+}; + +&i2s0 { + status = "okay"; +}; + +&lpass { + status = "okay"; +}; + +&mshc_0 { + status = "okay"; + num-slots = <1>; + broken-cd; + non-removable;Putting both properties - broken and non-removable - is not supported. Please choose one.
I'll remove the 'broken-cd' property.
quoted
+ card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + samsung,dw-mshc-hs400-timing = <0 3>; + samsung,read-strobe-delay = <90>; + fifo-depth = <0x80>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_rdqs>; + bus-width = <8>; + assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>; + assigned-clock-rates = <800000000>; +}; + +&pinctrl_alive { + pinctrl-names = "default"; + pinctrl-0 = <&initial_alive>; + + initial_alive: initial-state { + PIN(IN, gpa0-0, DOWN, LV1); + PIN(IN, gpa0-1, NONE, LV1); + PIN(IN, gpa0-2, DOWN, LV1); + PIN(IN, gpa0-3, NONE, LV1); + PIN(IN, gpa0-4, NONE, LV1); + PIN(IN, gpa0-5, DOWN, LV1); + PIN(IN, gpa0-6, NONE, LV1); + PIN(IN, gpa0-7, NONE, LV1); + + PIN(IN, gpa1-0, UP, LV1); + PIN(IN, gpa1-1, NONE, LV1); + PIN(IN, gpa1-2, NONE, LV1); + PIN(IN, gpa1-3, DOWN, LV1); + PIN(IN, gpa1-4, DOWN, LV1); + PIN(IN, gpa1-5, NONE, LV1); + PIN(IN, gpa1-6, NONE, LV1); + PIN(IN, gpa1-7, NONE, LV1); + + PIN(IN, gpa2-0, NONE, LV1); + PIN(IN, gpa2-1, NONE, LV1); + PIN(IN, gpa2-2, NONE, LV1); + PIN(IN, gpa2-3, DOWN, LV1); + PIN(IN, gpa2-4, NONE, LV1); + PIN(IN, gpa2-5, DOWN, LV1); + PIN(IN, gpa2-6, DOWN, LV1); + PIN(IN, gpa2-7, NONE, LV1); + + PIN(IN, gpa3-0, DOWN, LV1); + PIN(IN, gpa3-1, DOWN, LV1); + PIN(IN, gpa3-2, NONE, LV1); + PIN(IN, gpa3-3, DOWN, LV1); + PIN(IN, gpa3-4, NONE, LV1); + PIN(IN, gpa3-5, DOWN, LV1); + PIN(IN, gpa3-6, DOWN, LV1); + PIN(IN, gpa3-7, DOWN, LV1); + + PIN(IN, gpf1-0, NONE, LV1); + PIN(IN, gpf1-1, NONE, LV1); + PIN(IN, gpf1-2, DOWN, LV1); + PIN(IN, gpf1-4, UP, LV1); + PIN(OUT, gpf1-5, NONE, LV1); + PIN(IN, gpf1-6, DOWN, LV1); + PIN(IN, gpf1-7, DOWN, LV1); + + PIN(IN, gpf2-0, DOWN, LV1); + PIN(IN, gpf2-1, DOWN, LV1); + PIN(IN, gpf2-2, DOWN, LV1); + PIN(IN, gpf2-3, DOWN, LV1); + + PIN(IN, gpf3-0, DOWN, LV1); + PIN(IN, gpf3-1, DOWN, LV1); + PIN(IN, gpf3-2, NONE, LV1); + PIN(IN, gpf3-3, DOWN, LV1); + + PIN(IN, gpf4-0, DOWN, LV1); + PIN(IN, gpf4-1, DOWN, LV1); + PIN(IN, gpf4-2, DOWN, LV1); + PIN(IN, gpf4-3, DOWN, LV1); + PIN(IN, gpf4-4, DOWN, LV1); + PIN(IN, gpf4-5, DOWN, LV1); + PIN(IN, gpf4-6, DOWN, LV1); + PIN(IN, gpf4-7, DOWN, LV1); + + PIN(IN, gpf5-0, DOWN, LV1); + PIN(IN, gpf5-1, DOWN, LV1); + PIN(IN, gpf5-2, DOWN, LV1); + PIN(IN, gpf5-3, DOWN, LV1); + PIN(OUT, gpf5-4, NONE, LV1); + PIN(IN, gpf5-5, DOWN, LV1); + PIN(IN, gpf5-6, DOWN, LV1); + PIN(IN, gpf5-7, DOWN, LV1); + }; + + te_irq: te_irq { + samsung,pins = "gpf1-3"; + samsung,pin-function = <0xf>; + }; +}; + +&pinctrl_cpif { + pinctrl-names = "default"; + pinctrl-0 = <&initial_cpif>; + + initial_cpif: initial-state { + PIN(IN, gpv6-0, DOWN, LV1); + PIN(IN, gpv6-1, DOWN, LV1); + }; +}; + +&pinctrl_ese { + pinctrl-names = "default"; + pinctrl-0 = <&initial_ese>; + + initial_ese: initial-state { + PIN(IN, gpj2-0, DOWN, LV1); + PIN(IN, gpj2-1, DOWN, LV1); + PIN(IN, gpj2-2, DOWN, LV1); + }; +}; + +&pinctrl_fsys { + pinctrl-names = "default"; + pinctrl-0 = <&initial_fsys>; + + initial_fsys: initial-state { + PIN(IN, gpr3-0, NONE, LV1); + PIN(IN, gpr3-1, DOWN, LV1); + PIN(IN, gpr3-2, DOWN, LV1); + PIN(IN, gpr3-3, DOWN, LV1); + PIN(IN, gpr3-7, NONE, LV1); + }; +}; + +&pinctrl_imem { + pinctrl-names = "default"; + pinctrl-0 = <&initial_imem>; + + initial_imem: initial-state { + PIN(IN, gpf0-0, UP, LV1); + PIN(IN, gpf0-1, UP, LV1); + PIN(IN, gpf0-2, DOWN, LV1); + PIN(IN, gpf0-3, UP, LV1); + PIN(IN, gpf0-4, DOWN, LV1); + PIN(IN, gpf0-5, NONE, LV1); + PIN(IN, gpf0-6, DOWN, LV1); + PIN(IN, gpf0-7, UP, LV1); + }; +}; + +&pinctrl_nfc { + pinctrl-names = "default"; + pinctrl-0 = <&initial_nfc>; + + initial_nfc: initial-state { + PIN(IN, gpj0-2, DOWN, LV1); + }; +}; + +&pinctrl_peric { + pinctrl-names = "default"; + pinctrl-0 = <&initial_peric>; + + initial_peric: initial-state { + PIN(IN, gpv7-0, DOWN, LV1); + PIN(IN, gpv7-1, DOWN, LV1); + PIN(IN, gpv7-2, NONE, LV1); + PIN(IN, gpv7-3, DOWN, LV1); + PIN(IN, gpv7-4, DOWN, LV1); + PIN(IN, gpv7-5, DOWN, LV1); + + PIN(IN, gpb0-4, DOWN, LV1); + + PIN(IN, gpc0-2, DOWN, LV1); + PIN(IN, gpc0-5, DOWN, LV1); + PIN(IN, gpc0-7, DOWN, LV1); + + PIN(IN, gpc1-1, DOWN, LV1); + + PIN(IN, gpc3-4, NONE, LV1); + PIN(IN, gpc3-5, NONE, LV1); + PIN(IN, gpc3-6, NONE, LV1); + PIN(IN, gpc3-7, NONE, LV1); + + PIN(OUT, gpg0-0, NONE, LV1); + PIN(FUNC1, gpg0-1, DOWN, LV1); + + PIN(IN, gpd2-5, DOWN, LV1); + + PIN(IN, gpd4-0, NONE, LV1); + PIN(IN, gpd4-1, DOWN, LV1); + PIN(IN, gpd4-2, DOWN, LV1); + PIN(IN, gpd4-3, DOWN, LV1); + PIN(IN, gpd4-4, DOWN, LV1); + + PIN(IN, gpd6-3, DOWN, LV1); + + PIN(IN, gpd8-1, UP, LV1); + + PIN(IN, gpg1-0, DOWN, LV1); + PIN(IN, gpg1-1, DOWN, LV1); + PIN(IN, gpg1-2, DOWN, LV1); + PIN(IN, gpg1-3, DOWN, LV1); + PIN(IN, gpg1-4, DOWN, LV1); + + PIN(IN, gpg2-0, DOWN, LV1); + PIN(IN, gpg2-1, DOWN, LV1); + + PIN(IN, gpg3-0, DOWN, LV1); + PIN(IN, gpg3-1, DOWN, LV1); + PIN(IN, gpg3-5, DOWN, LV1); + PIN(IN, gpg3-7, DOWN, LV1); + }; +}; + +&pinctrl_touch { + pinctrl-names = "default"; + pinctrl-0 = <&initial_touch>; + + initial_touch: initial-state { + PIN(IN, gpj1-2, DOWN, LV1); + }; +}; + +&pwm { + pinctrl-0 = <&pwm0_out>; + pinctrl-names = "default"; + status = "okay"; +}; + +&mic { + status = "okay"; + + i80-if-timings { + }; +}; + +&serial_1 { + status = "okay"; +}; + +&spi_1 { + cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>; + status = "okay"; + + wm5110: wm5110-codec at 0 { + compatible = "wlf,wm5110"; + reg = <0x0>; + spi-max-frequency = <20000000>; + interrupt-parent = <&gpa0>; + interrupts = <4 0 0>;Why three interrupt cells? Please use also IRQ_TYPE_NONE for flags.
Two interrupt cells is correct. I check it[2] [2] Documentation/devicetree/bindings/mfd/arizona.txt I'll fix it.
quoted
+ clocks = <&xxti>, <&s2mps13_osc 2>;s/2/S2MPS11_CLK_BT/
OK. Best Regards, Chanwoo Choi