[PATCH 1/1] ARM: dts: imx6q-evi: Use GPIO_6 for fec irq
From: Joshua Clayton <hidden>
Date: 2016-08-11 16:54:14
Also in:
linux-devicetree, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
Apply hardware workaround for ethernet problem See nxp erratum err006687 Signed-off-by: Joshua Clayton <redacted> --- arch/arm/boot/dts/imx6q-evi.dts | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/arch/arm/boot/dts/imx6q-evi.dts b/arch/arm/boot/dts/imx6q-evi.dts
index 49c6f61..33bd04b 100644
--- a/arch/arm/boot/dts/imx6q-evi.dts
+++ b/arch/arm/boot/dts/imx6q-evi.dts@@ -127,6 +127,8 @@ pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; phy-reset-gpios = <&gpio1 25 0>; + interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, + <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; status = "okay"; };
@@ -312,6 +314,7 @@ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x4001b0a8 MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 + MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 >; };
--
2.7.4