Thread (31 messages) 31 messages, 5 authors, 2016-07-25

[PATCH 14/18] ARM: mvebu: add support for the Armada 395 SoC family

flat view
STALE3728d

From: Grzegorz Jaszczyk <hidden>
Date: 2016-07-21 12:41:13
Also in: linux-devicetree, lkml
Subsystem: arm/marvell kirkwood and armada 370, 375, 38x, 39x, xp, 3700, 7k/8k, cn9130 soc support, open firmware and flattened device tree bindings, the rest · Maintainers: Andrew Lunn, Gregory Clement, Sebastian Hesselbarth, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds

Revision v1 of 2 in this series.

Revisions (2)
  1. v1 current
  2. v2 [diff vs current]
Beside interfaces described in the armada-39x.dtsi, the Armada 395 SoC
family supports: 2 x SATA3 (2 ports in one unit) and the USB3.0

Signed-off-by: Grzegorz Jaszczyk <redacted>
---
 .../devicetree/bindings/arm/marvell/armada-39x.txt |  2 +-
 arch/arm/boot/dts/armada-395.dtsi                  | 76 ++++++++++++++++++++++
 2 files changed, 77 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/armada-395.dtsi
diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-39x.txt b/Documentation/devicetree/bindings/arm/marvell/armada-39x.txt
index 53d4ff9..f066801 100644
--- a/Documentation/devicetree/bindings/arm/marvell/armada-39x.txt
+++ b/Documentation/devicetree/bindings/arm/marvell/armada-39x.txt
@@ -17,4 +17,4 @@ compatible: must contain "marvell,armada398"
 
 Example:
 
-compatible = "marvell,a398-db", "marvell,armada398", "marvell,armada390";
+compatible = "marvell,a398-db", "marvell,armada398", "marvell,armada395", "marvell,armada390";
diff --git a/arch/arm/boot/dts/armada-395.dtsi b/arch/arm/boot/dts/armada-395.dtsi
new file mode 100644
index 0000000..ab5dc49
--- /dev/null
+++ b/arch/arm/boot/dts/armada-395.dtsi
@@ -0,0 +1,76 @@
+/*
+ * Device Tree Include file for Marvell Armada 395 SoC.
+ *
+ * Copyright (C) 2016 Marvell
+ *
+ * Grzegorz Jaszczyk <jaz@semihalf.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "armada-39x.dtsi"
+
+/ {
+	compatible = "marvell,armada395", "marvell,armada390";
+
+	soc {
+		internal-regs {
+			pinctrl at 18000 {
+				compatible = "marvell,mv88f6925-pinctrl";
+				reg = <0x18000 0x20>;
+			};
+
+			sata at a8000 {
+				compatible = "marvell,armada-380-ahci";
+				reg = <0xa8000 0x2000>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 15>;
+				status = "disabled";
+			};
+
+			usb3 at f0000 {
+				compatible = "marvell,armada-380-xhci";
+				reg = <0xf0000 0x4000>,<0xf4000 0x4000>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 9>;
+				status = "disabled";
+			};
+		};
+	};
+};
-- 
1.8.3.1
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help