On Fri, Jul 15, 2016 at 02:34:02PM +0530, Anup Patel wrote:
+static int uio_dmem_genirq_alloc_platdata(struct platform_device *pdev)
+{
+ struct uio_dmem_genirq_pdata pdata;
+ u32 dma_bits, regions;
+ u32 sizes[MAX_UIO_MAPS];
+ int ret;
+
+ memset(&pdata, 0, sizeof(pdata));
+
+ ret = of_property_read_u32(pdev->dev.of_node,
+ uio_of_dma_bits_prop, &dma_bits);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "Missing property %s\n", uio_of_dma_bits_prop);
+ return ret;
+ }
+ if (dma_bits > 64)
+ dma_bits = 64;
+
+ dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(dma_bits));
You really need to check the return value from this: this function
negotiates with the architecture, and if 64-bit DMA is not supported,
then the call will fail and you as a driver are expected to fall back
to 32-bit DMA only.
In that case, you're expected to call the same function with a 32-bit
mask, and if that fails, you're supposed to then decide that DMA is
not possible.
--
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.