On 2016?07?11? 16:03, Arnd Bergmann wrote:

On Sunday, July 10, 2016 3:27:26 PM CEST Wan Zongshun wrote:

quoted

+       ret = of_property_read_string(np, "compatible", &soc_dev_attr->soc_id);
+       if (ret)
               return -EINVAL;
+
+       soc_dev_attr->machine = "NUC900EVB";
+       soc_dev_attr->family = "NUC900";
+       soc_dev = soc_device_register(soc_dev_attr);
+       if (IS_ERR(soc_dev)) {
+               kfree(soc_dev_attr);
+               return -ENODEV;
+       }
+
+       ret = regmap_read(syscon_regmap, GCR_CHIPID, &nuc900_chipid);
+       if (ret)
+               return -ENODEV;
+
+       device_create_file(soc_device_to_device(soc_dev), &nuc900_chipid_attr);
+       device_create_file(soc_device_to_device(soc_dev), &nuc900_version_attr);
+
+       dev_info(&pdev->dev, "Nuvoton Chip ID: 0x%x, Version ID:0x%x\n",
+                nuc900_chipid & GCR_CHIPID_MASK,
+                (nuc900_chipid >> 24) & 0xff);

I'm still a bit unsure about the set of attributes here.

- The "soc_id" is read from the device tree from the field that contains
   the board name, I think for consistency you should try to map the
   GCR_CHIPID to the name of the SoC and assign that here

I will try to get chipid and map it to soc name like: ?nuc970?, "nuc910".

And I will set this soc name to soc_id, ok?

- The "machine" is hardcoded to "NUC900EVB", which in turn looks like
   a particular board but not the one you are running on. Maybe read
   that from the DT instead?

Should I read nuc970-evb.dts's "model" or "compatible" properties?

- The "revision" is not filled at all, I would suggest using something
   derived from the GCR_CHIPID register here

- you have two nonstandard attributes "chipid" and "version", which
   I'd hope to avoid -- the set of standard attributes is supposed to
   give enough information about the machine, and platform independent
   user space will never read those.

	Arnd