[PATCH 1/1] ARM: dts: imx6qdl.dtsi: add "arm, shared-override" for pl310

Am Montag, den 13.06.2016, 09:42 +0000 schrieb Peter Chen:

quoted

Am Samstag, den 11.06.2016, 19:57 +0800 schrieb Shawn Guo:

quoted

+ Lucas

On Tue, Jun 07, 2016 at 05:39:25PM +0800, Peter Chen wrote:

quoted

The imx6 SMP system has the same DMA memory coherency issue [1] with
pl310 L2 controller. With this shared override bit set, the customer
reports the DMA coherency issue is gone. Besides, I have tested the
performance using USB ethernet with/without this bit, it shows no
difference.

[1] http://patchwork.ozlabs.org/patch/469362/

Signed-off-by: Peter Chen <redacted>
---
 arch/arm/boot/dts/imx6qdl.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/imx6qdl.dtsi

b/arch/arm/boot/dts/imx6qdl.dtsi index ed613eb..30e21ee 100644

--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi

@@ -185,6 +185,7 @@
 			cache-level = <2>;
 			arm,tag-latency = <4 2 3>;
 			arm,data-latency = <4 2 3>;
+			arm,shared-override;

Lucas had an objection to the change [1], considering the case that
kernel is booted as non-secure.

My objection to this change still stands. Configuring the L2C to be compliant to the
ARMv7 ARM is at the same level as the CPU workarounds that can not be applied in
secure mode. Those must be done in the firmware, if your firmware doesn't do it it's
plain broken.

Sorry, I not understand what's your mean. We only changes L2 configuration when the
cache is disabled, what problem will be?

If the kernel is booted in non-secure mode, the L2 cache configuration
register is RO and the kernel will crash on the attempt to write into
this register.

Regards,
Lucas