[PATCH v2 08/11] Documentation: phy: Let the rockchip eMMC PHY get an exported card clock
From: robh@kernel.org (Rob Herring)
Date: 2016-06-16 18:42:34
Also in:
linux-devicetree, linux-mmc, linux-rockchip, lkml
On Mon, Jun 13, 2016 at 04:04:32PM -0700, Douglas Anderson wrote:
As of an earlier change in this series ("Documentation: mmc:
sdhci-of-arasan: Add ability to export card clock") the SDHCI driver
used on Rockchip SoCs can now expose its clock. Let's now specify that
the PHY can use it.
Letting the PHY get access to this clock means it can adjust
phyctrl_frqsel field appropriately. Although the Rockchip PHY appears
slightly different than the reference Arasan one, you can see that the
Arasan datasheet [1] had it defined as:
Select the frequency range of DLL operation:
3b'000 => 200MHz to 170 MHz
3b'001 => 170MHz to 140 MHz
3b'010 => 140MHz to 110 MHz
3b'011 => 110MHz to 80MHz
3b'100 => 80MHz to 50 MHz
3b'101 => 275Mhz to 250MHz
3b'110 => 250MHz to 225MHz
3b'111 => 225MHz to 200MHz
On the Rockchip version of the PHY we have less granularity but the idea
is the same.
[1]: https://arasan.com/wp-content/media/eMMC-5-1-Total-Solution_Rev-1-3.pdf
Signed-off-by: Douglas Anderson <dianders@chromium.org>
---
Changes in v2:
- List out clocks and clock names (Rob)
Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt | 9 +++++++++
1 file changed, 9 insertions(+)Acked-by: Rob Herring <robh@kernel.org>