On Fri, 10 Jun 2016, Thierry Reding wrote:

On Thu, Jun 09, 2016 at 12:41:07PM +0100, Lee Jones wrote:

quoted

On Wed, 08 Jun 2016, Rob Herring wrote:

quoted

On Wed, Jun 08, 2016 at 10:21:35AM +0100, Lee Jones wrote:

quoted

We're renaming the 'st,pwm-num-chan' binding to 'st,pwm-num-devs' to
be more inline with the naming conventions of the subsystem.  Where
we used to treat each line as a channel, the PWM convention is to
describe them as devices.

That's all linux implementation details and you are breaking 
compatibility.

Normally I'd agree with you, but I happen to know that a) this IP is
currently unused and b) up until this point (and probably beyond), ST
always ship the DTB with the kernel, so there will be no breakage.

Heh... I've long given up on trying to make that argument go anywhere.
The general rule is that once we support a binding in a kernel release
we have to support it indefinitely. If you really want to go ahead with
this change (I don't think you should), you'd at least have to document
both properties and support st,pwm-num-chan in the driver for backwards
compatibility.

I understand what the *general* rule is, but we have to remember why
this rule was put into place and apply some common sense.  In some
Enterprise user-cases where DTBs are written into ROM or where they
are difficult /impossible to update, I can completely understand the
requirement to support previous incarnations.  However in this, the
real world, DTBs are shipped with their corresponding kernels.  We
would lack a great deal of functionality if they weren't.  It is
therefor, foolhardy and inappropriate to stick to this rule just
'cos.

quoted

quoted

quoted

The second documentation adaption entails adding support for PWM
capture devices.  A new clock is required as well as an IRQ line.
We're also adding a new property similar to the one described
above, but for capture channels.  Typically, there will be less
capture channels than PWM-out, since all channels have the latter
capability, but only some have capture support.

Humm, sounds like all of this should be implied from compatible strings.

You mean have a bunch of of_machine_is_compatibles() scattered around?

I don't understand why you need this at all. Quite frankly I don't even
know why st,pwm-num-devs exists. I probably missed it back at the time.
Usually, like Rob suggests, this should be inferred from the compatible
string. One commonly used way to avoid scattering explicit checks for
the compatible string is to add this information to the of_device_id
table. See a bunch of existing drivers for reference.

Yes, I am aware of the strategy, and happy to oblige if this is your
suggestion.  I'll move all platform data into the driver and eradicate
the DT properties.

Also, why make a separation of output vs. capture channels at this
point? Could you not simply obtain the total number of PWM channels,
preferably from SoC data associated with the compatible string, and
check at ->capture() time whether or not the particular PWM supports
this?

As-is, you imply that you have n (output) + m (capture) channels, and
that 0..n-1 are output and n..n+m-1 are capture channels. What if that
no longer holds true, but 0 and 2 are the only ones that support
capture?

We do?  What makes you think that?

If you check for this at runtime you can avoid complicated DT parsing
code, but still get the safety check which should be enough to encourage
people to use the right channels in DT.

I'm pretty sure I can move all the data into the driver.  I did want
to avoid having lots of different compatible strings, but if that's
what you're suggesting, I can introduce one per supported platform.

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog