Thread (7 messages) flat view 7 messages, 4 authors, 2016-02-14

[PATCH 1/1 v2] imx6q-wandboard-revb1.dts: use unique machine name

From: Robert Nelson <hidden>
Date: 2016-02-07 23:53:23
Also in: linux-devicetree, lkml

On Sat, Feb 6, 2016 at 6:06 AM, Heinrich Schuchardt [off-list ref] wrote:
quoted hunk ↗ jump to hunk
Downstream packages like Debian flash-kernel use
/proc/device-tree/model
to determine which dtb file to install.

Hence each dts in the Linux kernel should provide a unique model identifier.

https://lkml.org/lkml/2014/7/8/579 created the new file
imx6q-wandboard-revb1.dts but used the same model identifier
as in imx6q-wandboard.dts.

This patch provides a unique model identifier for revision B1 of
the Wandboard Quad.

v2:
        correct name of referenced Debian package

Signed-off-by: Heinrich Schuchardt <redacted>
---
 arch/arm/boot/dts/imx6q-wandboard-revb1.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6q-wandboard-revb1.dts b/arch/arm/boot/dts/imx6q-wandboard-revb1.dts
index 20bf3c2..9207d80 100644
--- a/arch/arm/boot/dts/imx6q-wandboard-revb1.dts
+++ b/arch/arm/boot/dts/imx6q-wandboard-revb1.dts
@@ -13,7 +13,7 @@
 #include "imx6qdl-wandboard-revb1.dtsi"

 / {
-       model = "Wandboard i.MX6 Quad Board";
+       model = "Wandboard i.MX6 Quad Board rev B1";
Okay, this seems a little silly....

The wandboard has 5 versions:

solo: imx6dl-wandboard-revb1.dts

model = "Wandboard i.MX6 Dual Lite Board";

dual rev b: imx6dl-wandboard-revb1.dts

model = "Wandboard i.MX6 Dual Lite Board";

dual rev c: imx6dl-wandboard.dts

model = "Wandboard i.MX6 Dual Lite Board";

quad rev b: imx6q-wandboard-revb1.dts
model = "Wandboard i.MX6 Quad Board"; - > model = "Wandboard i.MX6
Quad Board rev B1";

quad rev c: imx6q-wandboard.dts
model = "Wandboard i.MX6 Quad Board";


Do you guys see the issue?  Either we change them "ALL", rev b or rev c...

Or "flash-kernel" needs to learn to copy more then one dtb (in this
case 5 *.dtb's)

PS, u-boot already can boot on all these with the same SPL/u-boot
image and detect which board and load the correct device tree binary..

Regards,

-- 
Robert Nelson
https://rcn-ee.com/
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help