[PATCH v2 10/51] mtd: nand: gpmi: use mtd_ooblayout_xxx() helpers where appropriate
From: Boris Brezillon <hidden>
Date: 2016-02-04 10:28:20
Also in:
linux-mips, linux-samsung-soc, lkml
Subsystem:
memory technology devices (mtd), nand flash subsystem, the rest · Maintainers:
Miquel Raynal, Richard Weinberger, Vignesh Raghavendra, Linus Torvalds
The mtd_ooblayout_xxx() helper functions have been added to avoid direct accesses to the ecclayout field, and thus ease for future reworks. Use these helpers in all places where the oobfree[] and eccpos[] arrays where directly accessed. Signed-off-by: Boris Brezillon <redacted> --- drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index 8122c69..3a29b65 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c@@ -1327,18 +1327,19 @@ static int gpmi_ecc_read_oob(struct mtd_info *mtd, struct nand_chip *chip, static int gpmi_ecc_write_oob(struct mtd_info *mtd, struct nand_chip *chip, int page) { - struct nand_oobfree *of = mtd->ecclayout->oobfree; + struct mtd_oob_region of = { }; int status = 0; /* Do we have available oob area? */ - if (!of->length) + mtd_ooblayout_free(mtd, 0, &of); + if (!of.length) return -EPERM; if (!nand_is_slc(chip)) return -EPERM; - chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize + of->offset, page); - chip->write_buf(mtd, chip->oob_poi + of->offset, of->length); + chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize + of.offset, page); + chip->write_buf(mtd, chip->oob_poi + of.offset, of.length); chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); status = chip->waitfunc(mtd, chip);
--
2.1.4