[PATCH v2 43/51] mtd: nand: s3c2410: switch to mtd_ooblayout_ops
From: Boris Brezillon <hidden>
Date: 2016-02-04 10:08:22
Also in:
linux-mips, linux-samsung-soc, lkml
Subsystem:
arm/samsung s3c, s5p and exynos arm architectures, memory technology devices (mtd), nand flash subsystem, the rest · Maintainers:
Krzysztof Kozlowski, Miquel Raynal, Richard Weinberger, Vignesh Raghavendra, Linus Torvalds
Implementing the mtd_ooblayout_ops interface is the new way of exposing ECC/OOB layout to MTD users. Signed-off-by: Boris Brezillon <redacted> --- drivers/mtd/nand/s3c2410.c | 32 +++++++++++++++++++++++++++----- 1 file changed, 27 insertions(+), 5 deletions(-)
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index 9c9397b..efa339b 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c@@ -84,11 +84,33 @@ /* new oob placement block for use with hardware ecc generation */ +static int s3c2410_ooblayout_ecc(struct mtd_info *mtd, int section, + struct mtd_oov_region *oobregion) +{ + if (section) + return -ERANGE; + + oobregion->offset = 0; + oobregion->length = 3; + + return 0; +} + +static int s3c2410_ooblayout_free(struct mtd_info *mtd, int section, + struct mtd_oov_region *oobregion) +{ + if (section) + return -ERANGE; + + oobregion->offset = 8; + oobregion->length = 8; + + return 0; +} -static struct nand_ecclayout nand_hw_eccoob = { - .eccbytes = 3, - .eccpos = {0, 1, 2}, - .oobfree = {{8, 8}} +const struct mtd_ooblayout_ops s3c2410_ooblayout_ops = { + .eccpos = s3c2410_eccpos, + .oobfree = s3c2410_oobfree, }; /* controller and mtd information */
@@ -919,7 +941,7 @@ static void s3c2410_nand_update_chip(struct s3c2410_nand_info *info, } else { chip->ecc.size = 512; chip->ecc.bytes = 3; - chip->ecc.layout = &nand_hw_eccoob; + mtd_set_ooblayout(nand_to_mtd(chip), &s3c2410_ooblayout_ops); } }
--
2.1.4