Heiko,

? 2016?01?07? 18:05, Heiko Stuebner ??:

Hi Caesar,

Am Donnerstag, 7. Januar 2016, 16:25:47 schrieb Caesar Wang:

quoted

SCLk_I2S_OUT is the noc bus clock for i2s module, this clock is used by
extra codecs.

Due to it shouldn't belong to any driver, but we need it enabled,
so just mark it as the CLK_IGNORE_UNUSED flag.

What makes you think it shouldn't belong to any driver?

In most schematics I have, i2s_clkout is going to some clock-input of the
audio codec - probably the MCLK input on your rt5616. And while the new
rt5616 driver does not seem to do clock handling, it should just handle the
clock using the normal APIs.

You are right,  that's seem has to find the root cause.
I'm wonder that the codec/i2s is working in kernel v4.1 patch without it.

In general,  the MLCK will be handled in i2s driver if the cpu side is 
master.

Heiko

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

-- 
Thanks,
Caesar