[PATCH v2 10/12] ARM: dts: rockchip: add the sdmmc for kylin board
From: Caesar Wang <hidden>
Date: 2016-01-07 08:27:50
Also in:
linux-devicetree, linux-rockchip, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
We should add the sdmmc but enabling it, since the sdmmc and uart2 ie reusing the same pin. That will cause the debug information can't display on console. Anyway, you only need add the okay status if someone wants to enable the sdmmc. e.g. if you use the adb to debug and run with android os. you can add the status = "okay" to enable the sdmmc for sd card working. Signed-off-by: Caesar Wang <redacted> --- Changes in v2: None arch/arm/boot/dts/rk3036-kylin.dts | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)
diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts
index c5e46f9..2dbc7bb 100644
--- a/arch/arm/boot/dts/rk3036-kylin.dts
+++ b/arch/arm/boot/dts/rk3036-kylin.dts@@ -357,6 +357,17 @@ pinctrl-0 = <&sdio_clk &sdio_cmd &sdio_bus4>; }; +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + card-detect-delay = <200>; + disable-wp; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>; +}; + &uart2 { status = "okay"; };
@@ -394,6 +405,12 @@ }; }; + sdmmc { + sdmmc_pwr: sdmmc-pwr { + rockchip,pins = <2 28 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + sleep { global_pwroff: global-pwroff { rockchip,pins = <2 7 RK_FUNC_1 &pcfg_pull_none>;
--
1.9.1