On 17 December 2015 at 21:11, Arnd Bergmann [off-list ref] wrote:

On Thursday 17 December 2015 11:03:47 Eric Anholt wrote:

quoted

quoted

quoted

 .../bindings/arm/bcm/raspberrypi,bcm2835-power.txt |  47 ++++
 arch/arm/boot/dts/bcm2835-rpi.dtsi                 |  11 +
 arch/arm/boot/dts/bcm2835.dtsi                     |   2 +-
 arch/arm/mach-bcm/Kconfig                          |  10 +
 arch/arm/mach-bcm/Makefile                         |   1 +
 arch/arm/mach-bcm/raspberrypi-power.c              | 247 +++++++++++++++++++++
 include/dt-bindings/arm/raspberrypi-power.h        |  41 ++++
 include/soc/bcm2835/raspberrypi-firmware.h         |   2 +
 8 files changed, 360 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-power.txt
 create mode 100644 arch/arm/mach-bcm/raspberrypi-power.c
 create mode 100644 include/dt-bindings/arm/raspberrypi-power.h

--
2.6.2

Besides a nitpick for patch2, I would also reverse the order of patch3
and patch2. DT docs should go in before the actual parsing of the new
bindings/compatibles.

Anyway, for the hole series, you may add my:

Reviewed-by: Ulf Hansson <redacted>

Would your tree be pulling the series (since it's power domains), or
should I (since it's SOC stuff)?

All of the above files go through the arm-soc tree by default.

That should work as I don't see any other dependency, unless
Eric/Alexander think there is.

Kind regards
Uffe