On 15 December 2015 at 22:40, Eric Anholt [off-list ref] wrote:

Since the pm_genpd_exit() patch is still going through review, and
other drivers in the tree just ignore the error cases, Ulf offered to
merge the series as a builtin driver not depending on that interface.
We still avoid dangling pointer references, by just continuing with
probing if of_genpd_add_provider_onecell() fails.  We can easily go
back and update the driver when a pm_genpd_exit() lands.

Alexander Aring (3):
  ARM: bcm2835: add rpi power domain driver
  dt-bindings: add rpi power domain driver bindings
  ARM: bcm2835: Add the Raspberry Pi power domain driver to the DT.

Eric Anholt (1):
  ARM: bcm2835: Define two new packets from the latest firmware.

 .../bindings/arm/bcm/raspberrypi,bcm2835-power.txt |  47 ++++
 arch/arm/boot/dts/bcm2835-rpi.dtsi                 |  11 +
 arch/arm/boot/dts/bcm2835.dtsi                     |   2 +-
 arch/arm/mach-bcm/Kconfig                          |  10 +
 arch/arm/mach-bcm/Makefile                         |   1 +
 arch/arm/mach-bcm/raspberrypi-power.c              | 247 +++++++++++++++++++++
 include/dt-bindings/arm/raspberrypi-power.h        |  41 ++++
 include/soc/bcm2835/raspberrypi-firmware.h         |   2 +
 8 files changed, 360 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-power.txt
 create mode 100644 arch/arm/mach-bcm/raspberrypi-power.c
 create mode 100644 include/dt-bindings/arm/raspberrypi-power.h

--
2.6.2

Besides a nitpick for patch2, I would also reverse the order of patch3
and patch2. DT docs should go in before the actual parsing of the new
bindings/compatibles.

Anyway, for the hole series, you may add my:

Reviewed-by: Ulf Hansson <redacted>

Kind regards
Uffe