On Tue, Dec 08, 2015 at 01:33:18AM +0100, Anton Bondarenko wrote:

On 2015-12-07 10:42, Sascha Hauer wrote:

quoted

On Sat, Dec 05, 2015 at 05:57:06PM +0100, Anton Bondarenko wrote:

quoted

RX DMA tail data handling doesn't work correctly in many cases with current
implementation. It happens because SPI core was setup to generates both RX
and RX TAIL events. And RX TAIL event does not work correctly.
This can be easily verified by sending SPI transaction with size modulus
WML(32 in our case) not equal 0.

Also removing change introduced in f6ee9b582d2db652497b73c1f117591dfb6d3a90
since this change only fix usecases with transfer size from 33 to 128 bytes
and does not fix 129 bytes etc.

This is output from transaction with len 138 bytes in loopback mode at 10Mhz:
TX0000: a3 97 a2 55 53 be f1 fc f9 79 6b 52 14 13 e9 e2
TX0010: 2d 51 8e 1f 56 08 57 27 a7 05 d4 d0 52 82 77 75
TX0020: 1b 99 4a ed 58 3d 6a 52 36 d5 24 4a 68 8e ad 95
TX0030: 5f 3c 35 b5 c4 8c dd 6c 11 32 3d e2 b4 b4 59 cf
TX0040: ce 23 3d 27 df a7 f9 96 fc 1e e0 66 2c 0e 7b 8c
TX0050: ca 30 42 8f bc 9f 7b ce d1 b8 b1 87 ec 8a d6 bb
TX0060: 2e 15 63 0e 3c dc a4 3a 7a 06 20 a7 93 1b 34 dd
TX0070: 4c f5 ec 88 96 68 d6 68 a0 09 6f 8e 93 47 c9 41
TX0080: db ac cf 97 89 f3 51 05 79 71

RX0000: a3 97 a2 55 53 be f1 fc f9 79 6b 52 14 13 e9 e2
RX0010: 2d 51 8e 1f 56 08 57 27 a7 05 d4 d0 52 82 77 75
RX0020: 1b 99 4a ed 58 3d 6a 52 36 d5 24 4a 68 8e ad 95
RX0030: 5f 3c 35 00 00 b5 00 00 00 c4 00 00 8c 00 00 dd
RX0040: 6c 11 32 3d e2 b4 b4 59 cf ce 23 3d 27 df a7 f9
RX0050: 96 fc 1e e0 66 2c 0e 7b 8c ca 30 42 8f 1f 1f bc
RX0060: 9f 7b ce d1 b8 b1 87 ec 8a d6 bb 2e 15 63 0e ed
RX0070: ed 3c 58 58 58 dc 3d 3d a4 6a 6a 3a 52 52 7a 36
RX0080: 06 20 a7 93 1b 34 dd 4c f5 ec

Zeros at offset 33 and 34 caused by reading empty RX FIFO which not possible
if DMA RX read was triggered by RX event. This mean DMA was triggered
by RX TAIL event.

Signed-off-by: Anton Bondarenko <redacted>
---
 drivers/spi/spi-imx.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index fa24637..7a68c62 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c

@@ -204,8 +204,8 @@ static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi,
 {
 	struct spi_imx_data *spi_imx = spi_master_get_devdata(master);

-	if (spi_imx->dma_is_inited &&
-	    transfer->len > spi_imx->wml * sizeof(u32))
+	if (spi_imx->dma_is_inited && transfer->len > spi_imx->wml &&
+	    (transfer->len % spi_imx->wml) == 0)
 		return true;

Must transfer->len really be bigger than spi_imx->wml? I would assume it
should be >= instead. And where is the * sizeof(u32) gone? If that's
unnecessary I heven't understood why.

Sascha

Agree on '>='. Will be in V6.
As for missing sizeof(u32).
According to SoC specification it's possible to operate with 8- or 16 bits
word directly by setting proper value in word_width field in CFG register. I
do not know the what exactly is fixed by f6ee9b582d, but I could suspect
such scenario:
Some SPI client (spi-nor?) trying to perform SPI transaction with len mod 32
not equal zero. It could be any value between 33 and 127, excluding 64. But
since DMA RX tail functionality does not work correctly RX contains some
garbage.

I just tested it. Back then I had 60byte transfers with the SPI NOR
driver. What I got is:

spi_master spi0: I/O Error in DMA RX
spi_master spi0: failed to transfer one message from queue

I can't follow anymore what led me to the assumption that this issue is
related to byte/wordsize mixup. The SPI NOR driver uses 8bit transfers
so one word is one byte, something the driver handles correctly.

I just tested your series successfully with this usecase. I can redo the
test with v6 once you send it and provide my tested-by tag.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |