[PATCH 11/12] tty: amba-pl011: add support for ZTE UART (EXPERIMENTAL)
From: Russell King <hidden>
Date: 2015-11-16 17:40:57
Also in:
linux-serial
Subsystem:
arm primecell uart pl010 and pl011 drivers, the rest, tty layer and serial drivers · Maintainers:
Russell King, Linus Torvalds, Greg Kroah-Hartman, Jiri Slaby
Add (incomplete) support for the ZTE UART to the AMBA PL011 driver. This is similar to the ARM and ST variants, except it has a different register address layout, and requires 32-bit accesses to the registers. Use the newly introduced register tables and access size support to cope with these differences. Signed-off-by: Russell King <redacted> --- drivers/tty/serial/amba-pl011.c | 23 +++++++++++++++++++++++ include/linux/amba/serial.h | 18 ++++++++++++++++++ 2 files changed, 41 insertions(+)
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 3470a1e67bbc..54c6c88a71a3 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c@@ -171,6 +171,29 @@ static struct vendor_data vendor_st = { .get_fifosize = get_fifosize_st, }; +static const u16 pl011_zte_offsets[REG_ARRAY_SIZE] = { + [REG_DR] = ZX_UART011_DR, + [REG_FR] = ZX_UART011_FR, + [REG_LCRH_RX] = ZX_UART011_LCRH, + [REG_LCRH_TX] = ZX_UART011_LCRH, + [REG_IBRD] = ZX_UART011_IBRD, + [REG_FBRD] = ZX_UART011_FBRD, + [REG_CR] = ZX_UART011_CR, + [REG_IFLS] = ZX_UART011_IFLS, + [REG_IMSC] = ZX_UART011_IMSC, + [REG_RIS] = ZX_UART011_RIS, + [REG_MIS] = ZX_UART011_MIS, + [REG_ICR] = ZX_UART011_ICR, + [REG_DMACR] = ZX_UART011_DMACR, +}; + +static struct vendor_data vendor_zte = { + .reg_offset = pl011_zte_offsets, + .access_32b = true, + .ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8, + .get_fifosize = get_fifosize_arm, +}; + /* Deals with DMA transactions */ struct pl011_sgbuf {
diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h
index 0ddb5c02ad8b..d76a19ba2cff 100644
--- a/include/linux/amba/serial.h
+++ b/include/linux/amba/serial.h@@ -65,6 +65,24 @@ #define ST_UART011_ABCR 0x100 /* Autobaud control register. */ #define ST_UART011_ABIMSC 0x15C /* Autobaud interrupt mask/clear register. */ +/* + * ZTE UART register offsets. This UART has a radically different address + * allocation from the ARM and ST variants, so we list all registers here. + * We assume unlisted registers do not exist. + */ +#define ZX_UART011_DR 0x04 +#define ZX_UART011_FR 0x14 +#define ZX_UART011_IBRD 0x24 +#define ZX_UART011_FBRD 0x28 +#define ZX_UART011_LCRH 0x30 +#define ZX_UART011_CR 0x34 +#define ZX_UART011_IFLS 0x38 +#define ZX_UART011_IMSC 0x40 +#define ZX_UART011_RIS 0x44 +#define ZX_UART011_MIS 0x48 +#define ZX_UART011_ICR 0x4c +#define ZX_UART011_DMACR 0x50 + #define UART011_DR_OE (1 << 11) #define UART011_DR_BE (1 << 10) #define UART011_DR_PE (1 << 9)
--
2.1.0