[PATCH v4 1/8] ASoC: dt-bindings: add rockchip tranceiver bindings
From: robh@kernel.org (Rob Herring)
Date: 2015-10-08 16:51:18
Also in:
alsa-devel, linux-devicetree, linux-rockchip, lkml
On Thu, Oct 8, 2015 at 8:31 AM, Sjoerd Simons [off-list ref] wrote:
quoted hunk ↗ jump to hunk
Add devicetree bindings for the spdif tranceiver found on found on rk3066, rk3188 and rk3288 SoCs Signed-off-by: Sjoerd Simons <redacted> --- Changes in v4: - Require rockchip,grf on RK3288 as the 8 channel solution has to be selected on that SoC - Make the compatibility string one of a known list rather then requiring a precise list of options. - Change the clock names to hclk and mclk instead of spdif_hclk and spdif_mclk to better match the implementation and data sheets. Changes in v3: None Changes in v2: None .../devicetree/bindings/sound/rockchip-spdif.txt | 44 ++++++++++++++++++++++ 1 file changed, 44 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/rockchip-spdif.txtdiff --git a/Documentation/devicetree/bindings/sound/rockchip-spdif.txt b/Documentation/devicetree/bindings/sound/rockchip-spdif.txt new file mode 100644 index 0000000..33dd82c --- /dev/null +++ b/Documentation/devicetree/bindings/sound/rockchip-spdif.txt@@ -0,0 +1,44 @@ +* Rockchip SPDIF transceiver + +The S/PDIF audio block is a stereo transceiver that allows the +processor to receive and transmit digital audio via an coaxial cable or +a fibre cable. + +Required properties: + +- compatible: should be one of the following: + - "rockchip,rk3288-spdif", "rockchip,rk3188-spdif" or + "rockchip,rk3066-spdif" +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: should contain the SPDIF interrupt.
+- #address-cells: should be 1. +- #size-cells: should be 0.
Why do you need these? Are you going to have sub nodes?
+- dmas: DMA specifiers for tx dma. See the DMA client binding,
+ Documentation/devicetree/bindings/dma/dma.txt
+- dma-names: should be "tx"
+- clocks: a list of phandle + clock-specifier pairs, one for each entry
+ in clock-names.
+- clock-names: should contain following:
+ - "hclk": clock for SPDIF controller
+ - "mclk" : clock for SPDIF bus
+
+Required properties on RK3288:
+ - rockchip,grf: the phandle of the syscon node for the general register
+ file (GRF)
+
+Example for the rk3188 SPDIF controller:
+
+spdif: spdif at 0x1011e000 {
+ compatible = "rockchip,rk3188-spdif", "rockchip,rk3066-spdif";
+ reg = <0x1011e000 0x2000>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dmas = <&dmac1_s 8>;
+ dma-names = "tx";
+ clock-names = "hclk", "mclk";
+ clocks = <&cru HCLK_SPDIF>, <&cru SCLK_SPDIF>;
+ status = "disabled";
+ #sound-dai-cells = <0>;
+};
--
2.6.1