[PATCH 2/6] ARM: dts: sun7i: Enable i2c bus 1 and 2 on the Wits A20 Pro DKT
From: Hans de Goede <hidden>
Date: 2015-08-14 14:44:33
Also in:
linux-devicetree
Subsystem:
the rest · Maintainer:
Linus Torvalds
Possibly related (same subject, not in this thread)
- 2015-08-14 · Re: [PATCH 2/6] ARM: dts: sun7i: Enable i2c bus 1 and 2 on the Wits A20 Pro DKT · Hans de Goede <hidden>
Enable i2c bus 1 and 2 on the Wits A20 Pro DKT, these are used for the touchscreen resp. the accelerometer. Signed-off-by: Hans de Goede <redacted> --- arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts
index da47608..85b500d 100644
--- a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts
+++ b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts@@ -92,6 +92,18 @@ }; }; +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + #include "axp209.dtsi" &mmc0 {
--
2.4.3