[PATCH 2/6] ARM: dts: sun7i: Enable i2c bus 1 and 2 on the Wits A20 Pro DKT
From: Hans de Goede <hidden>
Date: 2015-08-14 14:50:57
Also in:
linux-devicetree
Hi Maxime, On 14-08-15 16:44, Hans de Goede wrote:
Enable i2c bus 1 and 2 on the Wits A20 Pro DKT, these are used for the touchscreen resp. the accelerometer. Signed-off-by: Hans de Goede <redacted>
Erm, please skip this one it depends on another patch (which adds the sun7i-a20-wits-pro-a20-dkt.dts), which I've not submitted yet as it depends on the axp usb-power-supply driver. So as said please skip this one, I've squashed it into the patch adding the dts file, which I will submit later. Regards, Hans
quoted hunk
--- arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+)diff --git a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts index da47608..85b500d 100644 --- a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts +++ b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts@@ -92,6 +92,18 @@ }; }; +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + #include "axp209.dtsi" &mmc0 {