On 07/23/2015 05:26 PM, Marc Zyngier wrote:
It is not uncommon (at least with the ARM stuff) to have a piece
of hardware that implements different flavours of "interrupts".
A typical example of this is the GICv3 ITS, which implements
standard PCI/MSI support, but also some form of "generic MSI".
So far, the PCI/MSI domain is registered using the ITS device_node,
so that irq_find_host can return it. On the contrary, the raw MSI
domain is not registered with an device_node, making it impossible
to be looked up by another subsystem (obviously, using the same
device_node twice would only result in confusion, as it is not
defined which one irq_find_host would return).
A solution to this is to "type" domains that may be aliasing, and
to be able to lookup an device_node that matches a given type.
For this, we introduce irq_find_matching_host() as a superset
of irq_find_host:
struct irq_domain *irq_find_matching_host(struct device_node *node,
enum irq_domain_bus_token bus_token);
where bus_token is the "type" we want to match the domain against
(so far, only DOMAIN_BUS_ANY is defined). This result in some
moderately invasive changes on the PPC side (which is the only
user of the .match method).
This has otherwise no functionnal change.
Signed-off-by: Marc Zyngier <redacted>
---
arch/powerpc/platforms/512x/mpc5121_ads_cpld.c | 3 ++-
arch/powerpc/platforms/cell/interrupt.c | 3 ++-
arch/powerpc/platforms/embedded6xx/flipper-pic.c | 3 ++-
arch/powerpc/platforms/powermac/pic.c | 3 ++-
arch/powerpc/platforms/powernv/opal-irqchip.c | 3 ++-
arch/powerpc/platforms/ps3/interrupt.c | 3 ++-
arch/powerpc/sysdev/ehv_pic.c | 3 ++-
arch/powerpc/sysdev/i8259.c | 3 ++-
arch/powerpc/sysdev/ipic.c | 3 ++-
arch/powerpc/sysdev/mpic.c | 3 ++-
arch/powerpc/sysdev/qe_lib/qe_ic.c | 3 ++-
arch/powerpc/sysdev/xics/xics-common.c | 3 ++-
include/linux/irqdomain.h | 23 +++++++++++++++++++++--
kernel/irq/irqdomain.c | 18 +++++++++++++-----
14 files changed, 58 insertions(+), 19 deletions(-)
[...]
quoted hunk ↗ jump to hunk
/**
* irq_domain_add_linear() - Allocate and register a linear revmap irq_domain.
* @of_node: pointer to interrupt controller's device tree node.
diff --git a/kernel/irq/irqdomain.c b/kernel/irq/irqdomain.c
index 8c3577f..995d217 100644
--- a/kernel/irq/irqdomain.c
+++ b/kernel/irq/irqdomain.c
@@ -187,10 +187,12 @@ struct irq_domain *irq_domain_add_legacy(struct device_node *of_node,
EXPORT_SYMBOL_GPL(irq_domain_add_legacy);
/**
- * irq_find_host() - Locates a domain for a given device node
+ * irq_find_matching_host() - Locates a domain for a given device node
* @node: device-tree node of the interrupt controller
+ * @data: domain-specific data
Typo, @bus_token.
quoted hunk ↗ jump to hunk
*/
-struct irq_domain *irq_find_host(struct device_node *node)
+struct irq_domain *irq_find_matching_host(struct device_node *node,
+ enum irq_domain_bus_token bus_token)
Other than that,
Reviewed-by: Hanjun Guo <redacted>
Thanks
Hanjun