[PATCH v2 5/6] usb: dwc3: dwc3-st: Update the incorrect DT dwc3 example.
From: peter.griffin@linaro.org (Peter Griffin)
Date: 2015-03-30 15:18:06
Also in:
linux-devicetree, lkml
Subsystem:
open firmware and flattened device tree bindings, the rest, usb subsystem · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds, Greg Kroah-Hartman
There is a subtle typo phys-names should be phy-names. Using the current example means you don't have working usb (as you fail to obtain the phys). Also update the example to use the generic phy type constants which are now used for miphy28. Additionaly also remove the unnecessary new line in the example. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Rob Herring <robh@kernel.org> --- Documentation/devicetree/bindings/usb/dwc3-st.txt | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/dwc3-st.txt b/Documentation/devicetree/bindings/usb/dwc3-st.txt
index f9d7025..01c71b1 100644
--- a/Documentation/devicetree/bindings/usb/dwc3-st.txt
+++ b/Documentation/devicetree/bindings/usb/dwc3-st.txt@@ -49,8 +49,7 @@ st_dwc3: dwc3 at 8f94000 { st,syscfg = <&syscfg_core>; resets = <&powerdown STIH407_USB3_POWERDOWN>, <&softreset STIH407_MIPHY2_SOFTRESET>; - reset-names = "powerdown", - "softreset"; + reset-names = "powerdown", "softreset"; #address-cells = <1>; #size-cells = <1>; pinctrl-names = "default";
@@ -62,7 +61,7 @@ st_dwc3: dwc3 at 8f94000 { reg = <0x09900000 0x100000>; interrupts = <GIC_SPI 155 IRQ_TYPE_NONE>; dr_mode = "host"; - phys-names = "usb2-phy", "usb3-phy"; - phys = <&usb2_picophy2>, <&phy_port2 MIPHY_TYPE_USB>; + phy-names = "usb2-phy", "usb3-phy"; + phys = <&usb2_picophy2>, <&phy_port2 PHY_TYPE_USB3>; }; };
--
1.9.1