[PATCH v2 2/6] ahci: st: Update the DT example for how to obtain the PHY.
From: peter.griffin@linaro.org (Peter Griffin)
Date: 2015-03-30 15:18:48
Also in:
linux-devicetree, lkml
Subsystem:
libata subsystem (serial and parallel ata drivers), open firmware and flattened device tree bindings, the rest · Maintainers:
Damien Le Moal, Niklas Cassel, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
The example is wrong in that the phys property should take a phandle to the phy port. Also with the changing over to generic PHY type constants we also update that as well. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Lee Jones <redacted> --- Documentation/devicetree/bindings/ata/ahci-st.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/ata/ahci-st.txt b/Documentation/devicetree/bindings/ata/ahci-st.txt
index 0574a77..1331202 100644
--- a/Documentation/devicetree/bindings/ata/ahci-st.txt
+++ b/Documentation/devicetree/bindings/ata/ahci-st.txt@@ -11,7 +11,7 @@ Required properties: - reset-names : Associated names must be; "pwr-dwn" and "sw-rst" - clocks : The phandle for the clock - clock-names : Associated name must be; "ahci_clk" - - phys : The phandle for the PHY device + - phys : The phandle for the PHY port - phy-names : Associated name must be; "ahci_phy" Example:
@@ -21,7 +21,7 @@ Example: reg = <0xfe380000 0x1000>; interrupts = <GIC_SPI 157 IRQ_TYPE_NONE>; interrupt-names = "hostc"; - phys = <&miphy365x_phy MIPHY_PORT_0 MIPHY_TYPE_SATA>; + phys = <&phy_port0 PHY_TYPE_SATA>; phy-names = "ahci_phy"; resets = <&powerdown STIH416_SATA0_POWERDOWN>, <&softreset STIH416_SATA0_SOFTRESET>;
--
1.9.1