[PATCH v4 2/5] ARM: dts: Prepare exynos5410-odroidxu device tree
From: afaerber@suse.de (Andreas Färber)
Date: 2015-03-16 10:28:06
Also in:
linux-samsung-soc, lkml
Hi Javier, Am 16.03.2015 um 08:56 schrieb Javier Martinez Canillas:
On Sun, Mar 15, 2015 at 11:00 PM, Andreas F?rber [off-list ref] wrote:quoted
Derived from exynos5410-smdk5410.dts. Signed-off-by: Andreas F?rber <afaerber@suse.de> --- v1 -> v2 -> v3: Unchanged
Forgot to update the in-patch changelogs: v4 is unchanged as well
quoted
arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/exynos5410-odroidxu.dts | 78 +++++++++++++++++++++++++++++++ 2 files changed, 79 insertions(+) create mode 100644 arch/arm/boot/dts/exynos5410-odroidxu.dtsdiff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index a1c776b8dcec..b040737edcbc 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile@@ -103,6 +103,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \ exynos5250-snow.dtb \ exynos5250-spring.dtb \ exynos5260-xyref5260.dtb \ + exynos5410-odroidxu.dtb \ exynos5410-smdk5410.dtb \ exynos5420-arndale-octa.dtb \ exynos5420-peach-pit.dtb \diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts new file mode 100644 index 000000000000..97310bb727e2 --- /dev/null +++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts@@ -0,0 +1,78 @@ +/* + * Hardkernel ODROID-XU device tree source + * + * Copyright (c) 2014 SUSE LINUX Products GmbH + * + * Based on exynos5410-smdk5410.dts: + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +#include "exynos5410.dtsi" +/ { + model = "ODROID-XU based on EXYNOS5410"; + compatible = "hardkernel,odroid-xu", "samsung,exynos5410", "samsung,exynos5"; + + memory { + reg = <0x40000000 0x80000000>; + }; + + chosen { + bootargs = "console=ttySAC2,115200"; + }; +After commit a208ffd251d0 ("of: Enable console on serial ports specified by /chosen/stdout-path") the kernel is able to know what serial console to use if the DT defined an stdout-path property so should be preferred instead of using a console= parameter. I'll post today a series to change that on all exynos5 boards so you can base on that.
Okay, if no one else does, I could update smdk5410 before splitting.
quoted
+ fin_pll: xxti { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "fin_pll"; + #clock-cells = <0>; + }; +I think this should be defined in exynos5410.dtsi instead since is an IP block in the SoC and referenced in the .dts using a label to change the clock-frequency in the board.
I hope you understood that this is a literal copy of smdk5410, so I'm not going to make random changes here. If the Samsung guys want to make this change for smdk5410, then fine, but otherwise - like for Snow and Spring - I want to keep the diff -u low between the two.
quoted
+ firmware at 02037000 { + compatible = "samsung,secure-firmware"; + reg = <0x02037000 0x1000>; + }; + +}; + +&mmc_0 { + status = "okay"; + num-slots = <1>; + cap-mmc-highspeed; + broken-cd; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + bus-width = <8>; +}; + +&mmc_2 { + status = "okay"; + num-slots = <1>; + cap-sd-highspeed; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + bus-width = <4>; + disable-wp; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; --With those two changes: Reviewed-by: Javier Martinez Canillas <redacted>
Thanks, first review after posting for the third time... ;) Regards, Andreas -- SUSE Linux GmbH, Maxfeldstr. 5, 90409 N?rnberg, Germany GF: Felix Imend?rffer, Jane Smithard, Jennifer Guild, Dilip Upmanyu, Graham Norton; HRB 21284 (AG N?rnberg)