[PATCH 3/5] dt-bindings: mediatek: Add smi dts binding
From: Sergei Shtylyov <hidden>
Date: 2015-03-06 14:49:00
Also in:
linux-devicetree, linux-iommu, lkml
Hello. On 3/6/2015 1:48 PM, yong.wu at mediatek.com wrote:
From: Yong Wu <yong.wu@mediatek.com>
This patch add smi binding document.
Signed-off-by: Yong Wu <yong.wu@mediatek.com> --- .../devicetree/bindings/soc/mediatek/mediatek,smi.txt | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) create mode 100644 Documentation/devicetree/bindings/soc/mediatek/mediatek,smi.txt
quoted hunk ↗ jump to hunk
diff --git a/Documentation/devicetree/bindings/soc/mediatek/mediatek,smi.txt b/Documentation/devicetree/bindings/soc/mediatek/mediatek,smi.txt new file mode 100644 index 0000000..0fc9d1a --- /dev/null +++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,smi.txt@@ -0,0 +1,17 @@ +SMI hardware block diagram please help check <bindings/iommu/mediatek,iommu.txt> + +Required properties: +- compatible : must be "mediatek,mediatek,mt8173-smi-larb"
One "mediatek," is enough. :-)
+- reg : the register of each local arbiter +- clocks : the clocks of each local arbiter +- clock-name: larb_sub*(3 clockes at most)
clock-names.
+
+Example:
+ larb1:larb at 16010000 {
+ compatible = "mediatek,mt8173-smi-larb";
+ reg = <0 0x16010000 0 0x1000>;
+ clocks = <&mmsys MM_SMI_COMMON>,
+ <&vdecsys VDEC_CKEN>,
Please align with the < above.
+ <&vdecsys VDEC_LARB_CKEN>;
Use tabs instead of spaces, please.
+ clock-names = "larb_sub0", "larb_sub1", "larb_sub2"; + };
WBR, Sergei