[PATCH 3/5] dt-bindings: mediatek: Add smi dts binding
flat view
STALE4180d
From: yong.wu@mediatek.com (yong.wu at mediatek.com)
Date: 2015-03-06 10:49:16
Also in:
linux-devicetree, linux-iommu, lkml
Subsystem:
open firmware and flattened device tree bindings, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Revision rfc of 10 in this series.
Revisions (10)
From: Yong Wu <yong.wu@mediatek.com> This patch add smi binding document. Signed-off-by: Yong Wu <yong.wu@mediatek.com> --- .../devicetree/bindings/soc/mediatek/mediatek,smi.txt | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) create mode 100644 Documentation/devicetree/bindings/soc/mediatek/mediatek,smi.txt
diff --git a/Documentation/devicetree/bindings/soc/mediatek/mediatek,smi.txt b/Documentation/devicetree/bindings/soc/mediatek/mediatek,smi.txt
new file mode 100644
index 0000000..0fc9d1a
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,smi.txt@@ -0,0 +1,17 @@ +SMI hardware block diagram please help check <bindings/iommu/mediatek,iommu.txt> + +Required properties: +- compatible : must be "mediatek,mediatek,mt8173-smi-larb" +- reg : the register of each local arbiter +- clocks : the clocks of each local arbiter +- clock-name: larb_sub*(3 clockes at most) + +Example: + larb1:larb at 16010000 { + compatible = "mediatek,mt8173-smi-larb"; + reg = <0 0x16010000 0 0x1000>; + clocks = <&mmsys MM_SMI_COMMON>, + <&vdecsys VDEC_CKEN>, + <&vdecsys VDEC_LARB_CKEN>; + clock-names = "larb_sub0", "larb_sub1", "larb_sub2"; + };
--
1.8.1.1.dirty