[PATCH 2/2] ARM: shmobile: r8a7794: add GPIO DT support

Hello.

On 2/25/2015 1:11 PM, Laurent Pinchart wrote:

quoted

Describe GPIO[0-6] controllers in the R8A7794 device tree.

quoted

Based on original patch by Hisashi Nakamura
[off-list ref].

quoted

Signed-off-by: Sergei Shtylyov <redacted>

quoted

---
  arch/arm/boot/dts/r8a7794.dtsi |   84 +++++++++++++++++++++++++++++++++++++
  1 file changed, 84 insertions(+)

quoted

Index: renesas/arch/arm/boot/dts/r8a7794.dtsi
===================================================================

--- renesas.orig/arch/arm/boot/dts/r8a7794.dtsi
+++ renesas/arch/arm/boot/dts/r8a7794.dtsi

@@ -50,6 +50,90 @@

[...]

quoted

+	gpio1: gpio at e6051000 {
+		compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
+		reg = <0 0xe6051000 0 0x50>;
+		interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 32 32>;

This GPIO block has 26 GPIOs only.

[...]

quoted

+	gpio5: gpio at e6055000 {
+		compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
+		reg = <0 0xe6055000 0 0x50>;
+		interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 160 32>;

This GPIO block has 28 GPIOs only.

quoted

+		#interrupt-cells = <2>;
+		interrupt-controller;
+		clocks = <&mstp9_clks R8A7794_CLK_GPIO5>;
+	};
+
+	gpio6: gpio at e6055400 {
+		compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar";
+		reg = <0 0xe6055400 0 0x50>;
+		interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 192 32>;

This GPIO block has 26 GPIOs only.

    Yes, I know; I just wasn't sure what to do with the "gpio-ranges" prop of 
the following GPIO node. Should I keep the base GPIO # or update it as well?

WBR, Sergei