[PATCH 2/6] ahci: st: Update the DT example for how to obtain the PHY.
From: Lee Jones <hidden>
Date: 2015-02-25 15:13:54
Also in:
linux-devicetree, lkml
On Wed, 25 Feb 2015, Peter Griffin wrote:
The example is wrong in that the phys property should take a phandle to the phy port. Also with the changing over to generic PHY type constants we also update this as well. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> --- Documentation/devicetree/bindings/ata/ahci-st.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
Acked-by: Lee Jones <redacted>
quoted hunk ↗ jump to hunk
diff --git a/Documentation/devicetree/bindings/ata/ahci-st.txt b/Documentation/devicetree/bindings/ata/ahci-st.txt index 0574a77..1331202 100644 --- a/Documentation/devicetree/bindings/ata/ahci-st.txt +++ b/Documentation/devicetree/bindings/ata/ahci-st.txt@@ -11,7 +11,7 @@ Required properties: - reset-names : Associated names must be; "pwr-dwn" and "sw-rst" - clocks : The phandle for the clock - clock-names : Associated name must be; "ahci_clk" - - phys : The phandle for the PHY device + - phys : The phandle for the PHY port - phy-names : Associated name must be; "ahci_phy" Example:@@ -21,7 +21,7 @@ Example: reg = <0xfe380000 0x1000>; interrupts = <GIC_SPI 157 IRQ_TYPE_NONE>; interrupt-names = "hostc"; - phys = <&miphy365x_phy MIPHY_PORT_0 MIPHY_TYPE_SATA>; + phys = <&phy_port0 PHY_TYPE_SATA>; phy-names = "ahci_phy"; resets = <&powerdown STIH416_SATA0_POWERDOWN>, <&softreset STIH416_SATA0_SOFTRESET>;
-- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org ? Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog