---
Wolfram,

Actually, I was hoping that default pin hog mechanism
(pinctrl-names = "default") could also be used from i2c mux nodes
and devices. Anyway, I had a look at i2c-core/mux code and failed
how to achieve that easily. Instead I decided, it would also be ok
to put the pin hog into the i2c controller node where pins will be
bound by standard platform device code.

Cc: Jason Cooper <redacted>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory Clement <redacted>
Cc: Gabriel Dobato <redacted>
Cc: Wolfram Sang <redacted>
Cc: Stephen Warren <redacted>
Cc: linux-i2c at vger.kernel.org
Cc: devicetree at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-kernel at vger.kernel.org
---
 arch/arm/boot/dts/dove.dtsi | 40 ++++++++++++++++++++++++++++++++++++++--
 1 file changed, 38 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index 9ad829523a13..b3340e862b0e 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi

@@ -28,6 +28,42 @@
 		};
 	};
 
+	i2c-mux {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&i2c>;
+
+		pinctrl-names = "i2c0", "i2c1", "i2c2";
+		pinctrl-0 = <&pmx_i2cmux_0>;
+		pinctrl-1 = <&pmx_i2cmux_1>;
+		pinctrl-2 = <&pmx_i2cmux_2>;
+
+		i2c0: i2c at 0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+		};
+
+		i2c1: i2c at 1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			/* Requires pmx_i2c1 on i2c controller node */
+			status = "disabled";
+		};
+
+		i2c2: i2c at 2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			/* Requires pmx_i2c2 on i2c controller node */
+			status = "disabled";
+		};
+	};
+
 	l2: l2-cache {
 		compatible = "marvell,tauros2-cache";
 		marvell,tauros2-cache-features = <0>;

@@ -123,7 +159,7 @@
 				status = "disabled";
 			};
 
-			i2c0: i2c-ctrl at 11000 {
+			i2c: i2c-ctrl at 11000 {
 				compatible = "marvell,mv64xxx-i2c";
 				reg = <0x11000 0x20>;
 				#address-cells = <1>;

@@ -132,7 +168,7 @@
 				clock-frequency = <400000>;
 				timeout-ms = <1000>;
 				clocks = <&core_clk 0>;
-				status = "disabled";
+				status = "okay";
 			};
 
 			uart0: serial at 12000 {