Thread (53 messages) 53 messages, 6 authors, 2015-01-12
STALE4208d

[PATCH v2 06/21] ARM: tegra: remove old LIC support

From: Thierry Reding <hidden>
Date: 2015-01-08 11:29:55
Also in: linux-omap, linux-samsung-soc

On Wed, Jan 07, 2015 at 05:42:41PM +0000, Marc Zyngier wrote:
[...]
quoted hunk ↗ jump to hunk
diff --git a/arch/arm/mach-tegra/irq.c b/arch/arm/mach-tegra/irq.c
[...]
 void __init tegra_init_irq(void)
 {
-	int i;
-	void __iomem *distbase;
-
-	if (of_find_matching_node(NULL, tegra_ictlr_match))
-		goto skip_extn_setup;
-
-	tegra_legacy_irq_syscore_init();
-
-	distbase = IO_ADDRESS(TEGRA_ARM_INT_DIST_BASE);
-	num_ictlrs = readl_relaxed(distbase + GIC_DIST_CTR) & 0x1f;
-
-	if (num_ictlrs > ARRAY_SIZE(ictlr_reg_base)) {
-		WARN(1, "Too many (%d) interrupt controllers found. Maximum is %d.",
-			num_ictlrs, ARRAY_SIZE(ictlr_reg_base));
-		num_ictlrs = ARRAY_SIZE(ictlr_reg_base);
-	}
-
-	for (i = 0; i < num_ictlrs; i++) {
-		void __iomem *ictlr = ictlr_reg_base[i];
-		writel(~0, ictlr + ICTLR_CPU_IER_CLR);
-		writel(0, ictlr + ICTLR_CPU_IEP_CLASS);
-	}
-
-	gic_arch_extn.irq_ack = tegra_ack;
-	gic_arch_extn.irq_eoi = tegra_eoi;
-	gic_arch_extn.irq_mask = tegra_mask;
-	gic_arch_extn.irq_unmask = tegra_unmask;
-	gic_arch_extn.irq_retrigger = tegra_retrigger;
-	gic_arch_extn.irq_set_wake = tegra_set_wake;
-	gic_arch_extn.flags = IRQCHIP_MASK_ON_SUSPEND;
+	if (!of_find_matching_node(NULL, tegra_ictlr_match))
+		pr_warn("Outdated DT detected, suspend/resume will NOT work\n");
I'm not very happy about the ABI breakage here, but I also realize that
we need this change to properly describe the hardware. To make it more
obvious that people really should update their DTBs, maybe turn this
into a WARN()?
-skip_extn_setup:
 	tegra114_gic_cpu_pm_registration();
I'm not intimately familiar with the GIC, but is this really SoC
specific? Doesn't anybody else need this? Comparing to the GIC spec the
write of 0x1e0 to the GIC_CPU_CTRL register (which I assume corresponds
to GICC_CTLR in the spec), this simply disables the IRQ and FIQ bypass
signals for both group 0 and group 1.

Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150108/d70c076b/attachment.sig>
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help