Thread (28 messages) 28 messages, 8 authors, 2015-01-20

[PATCH v5 2/5] Documentation: DT: Add bindings for Spreadtrum SoC Platform

From: mark.rutland@arm.com (Mark Rutland)
Date: 2015-01-16 10:22:05
Also in: linux-api, linux-devicetree, linux-serial, lkml

On Fri, Jan 16, 2015 at 10:00:08AM +0000, Chunyan Zhang wrote:
quoted hunk ↗ jump to hunk
Adds Spreadtrum's prefix "sprd" to vendor-prefixes file.
Adds the devicetree binding documentations for Spreadtrum's sc9836-uart
and SC9836 SoC based on the Sharkl64 Platform which is a 64-bit SoC
Platform of Spreadtrum.

Signed-off-by: Chunyan Zhang <redacted>
Signed-off-by: Orson Zhai <redacted>
---
 Documentation/devicetree/bindings/arm/sprd.txt     |   11 +++++++++++
 .../devicetree/bindings/serial/sprd-uart.txt       |    7 +++++++
 .../devicetree/bindings/vendor-prefixes.txt        |    1 +
 3 files changed, 19 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/sprd.txt
 create mode 100644 Documentation/devicetree/bindings/serial/sprd-uart.txt
diff --git a/Documentation/devicetree/bindings/arm/sprd.txt b/Documentation/devicetree/bindings/arm/sprd.txt
new file mode 100644
index 0000000..31a629d
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/sprd.txt
@@ -0,0 +1,11 @@
+Spreadtrum SoC Platforms Device Tree Bindings
+----------------------------------------------------
+
+Sharkl64 is a Spreadtrum's SoC Platform which is based
+on ARM 64-bit processor.
+
+SC9836 openphone board with SC9836 SoC based on the
+Sharkl64 Platform shall have the following properties.
+
+Required root node properties:
+        - compatible = "sprd,sc9836-openphone", "sprd,sc9836";
diff --git a/Documentation/devicetree/bindings/serial/sprd-uart.txt b/Documentation/devicetree/bindings/serial/sprd-uart.txt
new file mode 100644
index 0000000..2aff0f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/sprd-uart.txt
@@ -0,0 +1,7 @@
+* Spreadtrum serial UART
+
+Required properties:
+- compatible: must be "sprd,sc9836-uart"
+- reg: offset and length of the register set for the device
+- interrupts: exactly one interrupt specifier
+- clocks: phandles to input clocks.
The order and relevance of each should be specified. If you have
multiple clocks I would strongly recommend you use clock-names to
distinguish them.

Otherwise this looks fine.

Mark.
quoted hunk ↗ jump to hunk
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index b1df0ad..0a8384f 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -153,6 +153,7 @@ snps	Synopsys, Inc.
 solidrun	SolidRun
 sony	Sony Corporation
 spansion	Spansion Inc.
+sprd	Spreadtrum Communications Inc.
 st	STMicroelectronics
 ste	ST-Ericsson
 stericsson	ST-Ericsson
-- 
1.7.9.5
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help