[PATCH v5 1/4] ARM: OMAP2+: Make sure pandora_wl1251_init_card() applies to SDIO only
From: dianders@chromium.org (Doug Anderson)
Date: 2014-12-02 23:43:09
Also in:
linux-omap, lkml
Subsystem:
arm port, omap2+ support, the rest · Maintainers:
Russell King, Aaro Koskinen, Andreas Kemnade, Kevin Hilman, Roger Quadros, Tony Lindgren, Linus Torvalds
In preparation for having init_card() called for all card types (not just SDIO), change pandora_wl1251_init_card() so it checks whether the card type is SDIO. Signed-off-by: Doug Anderson <dianders@chromium.org> --- Changes in v5: - Split fixup to pandora_wl1251_init_card() into its own patch. Changes in v3: None Changes in v2: None arch/arm/mach-omap2/board-omap3pandora.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 7f17087..969e100 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c@@ -254,12 +254,14 @@ static void pandora_wl1251_init_card(struct mmc_card *card) * We have TI wl1251 attached to MMC3. Pass this information to * SDIO core because it can't be probed by normal methods. */ - card->quirks |= MMC_QUIRK_NONSTD_SDIO; - card->cccr.wide_bus = 1; - card->cis.vendor = 0x104c; - card->cis.device = 0x9066; - card->cis.blksize = 512; - card->cis.max_dtr = 20000000; + if (card->type == MMC_TYPE_SDIO || card->type == MMC_TYPE_SD_COMBO) { + card->quirks |= MMC_QUIRK_NONSTD_SDIO; + card->cccr.wide_bus = 1; + card->cis.vendor = 0x104c; + card->cis.device = 0x9066; + card->cis.blksize = 512; + card->cis.max_dtr = 20000000; + } } static struct omap2_hsmmc_info omap3pandora_mmc[] = {
--
2.2.0.rc0.207.ga3a616c