[PATCH 1/4] mmc: sdhci: add a voltage switch callback function
From: Vincent Yang <hidden>
Date: 2014-11-21 00:51:37
Also in:
linux-mmc
Subsystem:
multimedia card (mmc), secure digital (sd) and sdio subsystem, secure digital host controller interface (sdhci) driver, the rest · Maintainers:
Ulf Hansson, Adrian Hunter, Linus Torvalds
This patch adds a callback function to do controller-specific actions when switching voltages. It is a preparation and will be used by Fujitsu SDHCI controller f_sdh30 driver. Signed-off-by: Vincent Yang <redacted> --- drivers/mmc/host/sdhci.c | 4 ++++ drivers/mmc/host/sdhci.h | 1 + 2 files changed, 5 insertions(+)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index ada1a3e..66ad318 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c@@ -1790,6 +1790,10 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host, ctrl |= SDHCI_CTRL_VDD_180; sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2); + /* Some controller need to do more when switching */ + if (host->ops->voltage_switch) + host->ops->voltage_switch(host); + /* 1.8V regulator output should be stable within 5 ms */ ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); if (ctrl & SDHCI_CTRL_VDD_180)
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 31896a7..b6080ac 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h@@ -296,6 +296,7 @@ struct sdhci_ops { void (*adma_workaround)(struct sdhci_host *host, u32 intmask); void (*platform_init)(struct sdhci_host *host); void (*card_event)(struct sdhci_host *host); + void (*voltage_switch)(struct sdhci_host *host); }; #ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
--
1.9.0