Thread (31 messages) flat view 31 messages, 7 authors, 2014-12-01

[PATCH v2 02/11] mfd: syscon: Add Atmel Matrix bus DT binding documentation

From: Lee Jones <hidden>
Date: 2014-11-10 09:56:11
Also in: linux-devicetree, lkml

On Wed, 05 Nov 2014, Boris Brezillon wrote:
quoted hunk ↗ jump to hunk
The Matrix registers are provided to configure internal bus behavior on
at91 SoCs.
Some registers might be access by several drivers (e.g. to configure
external memory bus timings), hence we declare this register set as a
syscon device.

Signed-off-by: Boris Brezillon <redacted>
---
 .../devicetree/bindings/mfd/atmel-matrix.txt       | 24 ++++++++++++++++++++++
 1 file changed, 24 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/atmel-matrix.txt
diff --git a/Documentation/devicetree/bindings/mfd/atmel-matrix.txt b/Documentation/devicetree/bindings/mfd/atmel-matrix.txt
new file mode 100644
index 0000000..405cac9
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/atmel-matrix.txt
@@ -0,0 +1,24 @@
+* Device tree bindings for Atmel Bus Matrix
+
+The Bus Matrix registers are used to configure Atmel SoCs internal bus
+behavior (master/slave priorities, undefined burst length type, ...)
+
+Required properties:
+- compatible:		should be one of the following
+			"atmel,at91sam9260-matrix", "syscon"
+			"atmel,at91sam9261-matrix", "syscon"
+			"atmel,at91sam9263-matrix", "syscon"
+			"atmel,at91sam9263-matrix", "syscon"
+			"atmel,at91sam9g45-matrix", "syscon"
+			"atmel,at91sam9n12-matrix", "syscon"
+			"atmel,at91sam9x5-matrix", "syscon"
+			"atmel,sama5d3-matrix", "syscon"
+- reg:			contains offset/length value of the Bus Matrix
+			memory region.
Same comments as before:

Acked-by: Lee Jones <redacted>
+Example:
+
+matrix: matrix at ffffec00 {
+	compatible = "atmel,sama5d3-matrix", "syscon";
+	reg = <0xffffec00 0x200>;
+};
-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help