Thread (31 messages) flat view 31 messages, 7 authors, 2014-12-01

[PATCH v2 04/11] mfd: syscon: Add Atmel SMC binding doc

From: Lee Jones <hidden>
Date: 2014-11-10 09:55:11
Also in: linux-devicetree, lkml

On Wed, 05 Nov 2014, Boris Brezillon wrote:
quoted hunk ↗ jump to hunk
The SMC registers are used to configure Atmel EBI (External Bus Interface)
to interface with standard memory devices (NAND, NOR, SRAM or specialized
devices like FPGAs).

Declare this memory region as a syscon, so that different drivers can
configure the SMC interface (mostly timing configuration) according to
their need.

Signed-off-by: Boris Brezillon <redacted>
---
 Documentation/devicetree/bindings/mfd/atmel-smc.txt | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/atmel-smc.txt
diff --git a/Documentation/devicetree/bindings/mfd/atmel-smc.txt b/Documentation/devicetree/bindings/mfd/atmel-smc.txt
new file mode 100644
index 0000000..0c0cc3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/atmel-smc.txt
@@ -0,0 +1,19 @@
+* Device tree bindings for Atmel SMC (Static Memory Controller)
+
+The SMC registers are used to configure Atmel EBI (External Bus Interface)
+to interface with standard memory devices (NAND, NOR, SRAM or specialized
+devices like FPGAs).
+
+Required properties:
+- compatible:		should be one of the following
+			"atmel,at91sam9260-smc", "syscon"
+			"atmel,sama5d3-smc", "syscon"
+- reg:			contains offset/length value of the SMC memory
+			region.
I'd be happier if the sentences started with uppercase letters, but
nothing too offensive or controversial here:

Acked-by: Lee Jones <redacted>
+Example:
+
+smc: smc at ffffc000 {
+	compatible = "atmel,sama5d3-smc", "syscon";
+	reg = <0xffffc000 0x1000>;
+};
-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help