[PATCH v6 07/12] usb: chipidea: add a usb2 driver for ci13xxx

On Tue, Sep 30, 2014 at 08:12:07AM +0800, Peter Chen wrote:

On Tue, Sep 23, 2014 at 12:28:03PM +0200, Antoine Tenart wrote:

quoted

Add a USB2 ChipIdea driver for ci13xxx, with optional PHY, clock
and DMA mask, to support USB2 ChipIdea controllers that don't need
specific functions.

Tested on the Marvell Berlin SoCs USB controllers.

Signed-off-by: Antoine Tenart <redacted>
---
 drivers/usb/chipidea/Makefile       |   1 +
 drivers/usb/chipidea/ci_hdrc_usb2.c | 138 ++++++++++++++++++++++++++++++++++++
 2 files changed, 139 insertions(+)
 create mode 100644 drivers/usb/chipidea/ci_hdrc_usb2.c

diff --git a/drivers/usb/chipidea/Makefile b/drivers/usb/chipidea/Makefile
index 2f099c7df7b5..1fc86a2ca22d 100644
--- a/drivers/usb/chipidea/Makefile
+++ b/drivers/usb/chipidea/Makefile

@@ -10,6 +10,7 @@ ci_hdrc-$(CONFIG_USB_OTG_FSM)		+= otg_fsm.o
 
 # Glue/Bridge layers go here
 
+obj-$(CONFIG_USB_CHIPIDEA)	+= ci_hdrc_usb2.o
 obj-$(CONFIG_USB_CHIPIDEA)	+= ci_hdrc_msm.o
 obj-$(CONFIG_USB_CHIPIDEA)	+= ci_hdrc_zevio.o
 

diff --git a/drivers/usb/chipidea/ci_hdrc_usb2.c b/drivers/usb/chipidea/ci_hdrc_usb2.c
new file mode 100644
index 000000000000..6eae1de587f2
--- /dev/null
+++ b/drivers/usb/chipidea/ci_hdrc_usb2.c

@@ -0,0 +1,138 @@
+/*
+ * Copyright (C) 2014 Marvell Technology Group Ltd.
+ *
+ * Antoine Tenart <antoine.tenart@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/usb/chipidea.h>
+#include <linux/usb/hcd.h>
+#include <linux/usb/ulpi.h>
+
+#include "ci.h"
+
+struct ci_hdrc_usb2_priv {
+	struct platform_device	*ci_pdev;
+	struct clk		*clk;
+};
+
+static int ci_hdrc_usb2_dt_probe(struct device *dev,
+				 struct ci_hdrc_platform_data *ci_pdata)
+{
+	ci_pdata->phy = of_phy_get(dev->of_node, 0);
+	if (IS_ERR(ci_pdata->phy)) {
+		if (PTR_ERR(ci_pdata->phy) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+
+		/* PHY is optional */
+		ci_pdata->phy = NULL;
+	}
+
+	return 0;
+}
+
+static struct ci_hdrc_platform_data ci_default_pdata = {
+	.capoffset	= DEF_CAPOFFSET,
+	.flags		= CI_HDRC_REQUIRE_TRANSCEIVER |
+			  CI_HDRC_DISABLE_STREAMING,
+};
+
+static int ci_hdrc_usb2_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct ci_hdrc_usb2_priv *priv;
+	struct ci_hdrc_platform_data *ci_pdata = dev_get_platdata(&pdev->dev);
+	int ret;
+
+	if (!ci_pdata)
+		ci_pdata = &ci_default_pdata;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->clk = devm_clk_get(dev, NULL);
+	if (!IS_ERR(priv->clk)) {
+		ret = clk_prepare_enable(priv->clk);
+		if (ret) {
+			dev_err(dev, "failed to enable the clock: %d\n", ret);
+			return ret;
+		}
+	}
+
+	if (dev->of_node) {
+		ret = ci_hdrc_usb2_dt_probe(dev, ci_pdata);
+		if (ret)
+			goto clk_err;
+	} else {
+		ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+		if (ret)
+			goto clk_err;
+	}

	
Hi Antoine, if you pay attention the discussion for this patch, you should
know to do change for your next revision

- Call below unconditionally:

quoted

+		ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+		if (ret)
+			goto clk_err;

-Do not need function ci_hdrc_usb2_dt_probe, we need to cover
both dt and non-dt, but there is nothing we can to differentiate now,
The phy handle should be moved to core driver, since your generic phy
driver are still not accepted, I can't do it by myself. Either you or
I can do it after your generic phy support series has been accepted.

quoted

+		ret = ci_hdrc_usb2_dt_probe(dev, ci_pdata);

- Others are ok

- The sequence of patch sets:
1. The generic PHY support for chipidea idea
2. Move getting PHY from individual glue layer to core driver
3. The generic chipidea driver 

Peter

quoted

+
+	ci_pdata->name = dev_name(&pdev->dev);
+
+	priv->ci_pdev = ci_hdrc_add_device(dev, pdev->resource,
+					   pdev->num_resources, ci_pdata);
+	if (IS_ERR(priv->ci_pdev)) {
+		ret = PTR_ERR(priv->ci_pdev);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev,
+				"failed to register ci_hdrc platform device: %d\n",
+				ret);
+		goto clk_err;
+	}
+
+	platform_set_drvdata(pdev, priv);
+
+	pm_runtime_no_callbacks(dev);
+	pm_runtime_enable(dev);
+
+	return 0;
+
+clk_err:
+	if (!IS_ERR(priv->clk))
+		clk_disable_unprepare(priv->clk);
+	return ret;
+}
+
+static int ci_hdrc_usb2_remove(struct platform_device *pdev)
+{
+	struct ci_hdrc_usb2_priv *priv = platform_get_drvdata(pdev);
+
+	pm_runtime_disable(&pdev->dev);
+	ci_hdrc_remove_device(priv->ci_pdev);
+	clk_disable_unprepare(priv->clk);
+
+	return 0;
+}
+
+static const struct of_device_id ci_hdrc_usb2_of_match[] = {
+	{ .compatible = "chipidea,usb2" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ci_hdrc_usb2_of_match);
+
+static struct platform_driver ci_hdrc_usb2_driver = {
+	.probe	= ci_hdrc_usb2_probe,
+	.remove	= ci_hdrc_usb2_remove,
+	.driver	= {
+		.name		= "chipidea-usb2",
+		.owner		= THIS_MODULE,
+		.of_match_table	= of_match_ptr(ci_hdrc_usb2_of_match),
+	},
+};
+module_platform_driver(ci_hdrc_usb2_driver);
+
+MODULE_DESCRIPTION("ChipIdea HDRC USB2 binding for ci13xxx");
+MODULE_AUTHOR("Antoine Tenart [off-list ref]");
+MODULE_LICENSE("GPL");
-- 
1.9.1

-- 
Best Regards,
Peter Chen
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

-- 
Best Regards,
Peter Chen