[PATCH v6 10/12] ARM: dts: Berlin: enable USB on the BG2Q DMP
From: Antoine Tenart <hidden>
Date: 2014-09-23 10:30:11
Also in:
linux-devicetree, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
Enable the 2 available USB PHY and USB nodes on the Marvell Berlin BG2Q DMP. Signed-off-by: Antoine Tenart <redacted> --- arch/arm/boot/dts/berlin2q-marvell-dmp.dts | 53 ++++++++++++++++++++++++++++++ 1 file changed, 53 insertions(+)
diff --git a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
index a357ce02a64e..663aedb173e0 100644
--- a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
+++ b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts@@ -7,6 +7,8 @@ */ /dts-v1/; + +#include <dt-bindings/gpio/gpio.h> #include "berlin2q.dtsi" / {
@@ -21,6 +23,39 @@ choosen { bootargs = "console=ttyS0,115200 earlyprintk"; }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_usb0_vbus: regulator at 0 { + compatible = "regulator-fixed"; + regulator-name = "usb0_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&portb 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb1_vbus: regulator at 1 { + compatible = "regulator-fixed"; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&portb 10 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb2_vbus: regulator at 2 { + compatible = "regulator-fixed"; + regulator-name = "usb2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&portb 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + }; }; &sdhci1 {
@@ -45,3 +80,21 @@ &uart0 { status = "okay"; }; + +&usb_phy0 { + status = "okay"; +}; + +&usb_phy2 { + status = "okay"; +}; + +&usb0 { + vbus-supply = <®_usb0_vbus>; + status = "okay"; +}; + +&usb2 { + vbus-supply = <®_usb2_vbus>; + status = "okay"; +};
--
1.9.1