Thread (15 messages) 15 messages, 4 authors, 2014-09-18

[PATCH v5 2/4] dt-bindings: document Rockchip thermal

From: dmitry.torokhov@gmail.com (Dmitry Torokhov)
Date: 2014-09-17 20:13:55
Also in: linux-devicetree, linux-pm, lkml

On Wed, Sep 17, 2014 at 12:48:16PM -0700, Doug Anderson wrote:
Caesar,

On Tue, Sep 16, 2014 at 8:59 PM, Caesar Wang [off-list ref] wrote:
quoted
This add the necessary binding documentation for the thermal
found on Rockchip SoCs

Signed-off-by: zhaoyifeng <redacted>
Signed-off-by: Caesar Wang <redacted>
---
 .../bindings/thermal/rockchip-thermal.txt          | 41 ++++++++++++++++++++++
 1 file changed, 41 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
diff --git a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
new file mode 100644
index 0000000..6fc8bc3
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
@@ -0,0 +1,41 @@
+* Temperature Sensor ADC (TSADC) on rockchip SoCs
+
+Required properties:
+- compatible: "rockchip,rk3288-tsadc"
+- reg: physical base address of the controller and length of memory mapped
+       region.
+- interrupts: The interrupt number to the cpu. The interrupt specifier format
+             depends on the interrupt controller.
+- clocks: Must contain an entry for each entry in clock-names.
+- clock-names: Shall be "tsadc" for the converter-clock, and "apb_pclk" for
+              the peripheral clock.
+- num-trips:  number of total trip points, this is required, set it 0 if none,
+             if greater than 0, the following properties must be defined;
nit: there is whitespace damage (space before tab) on the line before
this one.  It's more obvious in the patch you uploaded to gerrit which
highlights this in red:

https://chromium-review.googlesource.com/#/c/213967/5/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt

Did you run your patches through checkpatch before submitting?
FWIW vim users like me can put the following in their .vimrc file to
have whitespace damage visible right away:

:highlight RedundantSpaces ctermbg=red guibg=red
:match RedundantSpaces /\s\+$\| \+\ze\t/

Thanks.

-- 
Dmitry
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help