On 09/11/2014 01:42 PM, Sebastian Andrzej Siewior wrote:

quoted

We should add hooks like tx_dma and rx_dma to struct uart_8250_dma so
that the probe drivers can replace serial8250_tx_dma and
seria8250_rx_dma, like I think Alan already suggested.

Okay. Wasn't aware that Alan already suggested that.
I also need a watchdog timer for TX since it seems that on omap3 the
DMA engine suddenly forgets to continue with DMA?

If this is really what we want, I would need to refactor a few things?

quoted

Let's keep serial8250_tx_dma/rx_dma as the default, and not add any
quirks to them. Only if there is a very common case should it be
handled in those. The case of RX req needing to be sent before data in
FIFO maybe one of those, but I'm no sure.

keep in mind that both (RX & TX bugs/hacks) need also a bit of handling
in the 8250-core so it works together (like the tx_err member so we
fall back to manual xmit)

Done. I've kept the RX workarounds in the 8250_dma and moved the TX
part into the omap driver.
I needed to add the 8250_core pieces of patch #10 [0]. Now If you say,
couldn't this done in an other way then I could move the RX workarounds
pieces to the omap driver as well as the interrupt routine. Any
preferences?

[0] [PATCH 10/16] tty: serial: 8250_dma: optimize the xmit path due to
    UART_BUG_DMA_TX

Sebastian