[PATCH v2 0/3] ARM: dts: qcom: Add initial IFC6540 board support

On Sep 2, 2014, at 10:40 AM, Georgi Djakov [off-list ref] wrote:

Add basic support for the IFC6540 single-board computer boards, that are
based on the APQ8084 SoC. The first patch adds the initial device tree.
The second enables the serial console. The third adds the SDHC nodes and
enables the eMMC.

Should go through the qcom/arm-soc tree.

Changes since v1:
- This time add linux-arm-msm list to the CC.
- Include a third patch for enabling the eMMC.

Georgi Djakov (3):
 ARM: dts: qcom: Add initial IFC6540 board device tree
 ARM: dts: qcom: Enable serial port on IFC6540 boards
 ARM: dts: qcom: Add SDHC nodes for APQ8084 platform

arch/arm/boot/dts/Makefile                 |    1 +
arch/arm/boot/dts/qcom-apq8084-ifc6540.dts |   23 +++++++++++++++++++++++
arch/arm/boot/dts/qcom-apq8084.dtsi        |   23 +++++++++++++++++++++++
3 files changed, 47 insertions(+)
create mode 100644 arch/arm/boot/dts/qcom-apq8084-ifc6540.dts

-- 
1.7.9.5

Thanks, there is really no reason for these to be 3 patches, can you squash them down into one.

- k

-- 
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation