[PATCH v2 5/6] ARM: mvebu: Add proper pin muxing on Netgear ReadyNAS 104
From: Ezequiel Garcia <hidden>
Date: 2014-08-11 12:14:40
Subsystem:
the rest · Maintainer:
Linus Torvalds
This commit adds the required pin muxing for the network interfaces and the MDIO interface to be properly initialized. For instance, this makes it possible for a bootloader to initialize and access the network interfaces Signed-off-by: Ezequiel Garcia <redacted> --- arch/arm/boot/dts/armada-370-netgear-rn104.dts | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
index c5fe8b5..f56bb1b 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts@@ -86,6 +86,8 @@ }; mdio { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; phy0: ethernet-phy at 0 { /* Marvell 88E1318 */ reg = <0>; };
@@ -96,12 +98,16 @@ }; ethernet at 70000 { + pinctrl-0 = <&ge0_rgmii_pins>; + pinctrl-names = "default"; status = "okay"; phy = <&phy0>; phy-mode = "rgmii-id"; }; ethernet at 74000 { + pinctrl-0 = <&ge1_rgmii_pins>; + pinctrl-names = "default"; status = "okay"; phy = <&phy1>; phy-mode = "rgmii-id";
--
2.0.1