[PATCH v2 4/6] ARM: mvebu: Add proper pin muxing on Netgear ReadyNAS 102

This commit adds the required pin muxing for the network interfaces and
the MDIO interface to be properly initialized. For instance, this makes
it possible for a bootloader to initialize and access the network interfaces

Signed-off-by: Ezequiel Garcia <redacted>
---
 arch/arm/boot/dts/armada-370-netgear-rn102.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
index d6d572e..03f917e 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts

@@ -101,12 +101,16 @@
 			};
 
 			mdio {
+				pinctrl-0 = <&mdio_pins>;
+				pinctrl-names = "default";
 				phy0: ethernet-phy at 0 { /* Marvell 88E1318 */
 					reg = <0>;
 				};
 			};
 
 			ethernet at 74000 {
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
 				status = "okay";
 				phy = <&phy0>;
 				phy-mode = "rgmii-id";

-- 
2.0.1