[PATCH v3 10/15] ARM: tegra: Enable the DFLL on the Jetson TK1
From: Tuomas Tynkkynen <hidden>
Date: 2014-08-19 03:42:55
Also in:
linux-devicetree, linux-pm, linux-tegra, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
From: Tuomas Tynkkynen <redacted> Add the board-specific properties of the DFLL for the Jetson TK1 board. On this board, the DFLL will take control of the sd0 regulator on the on-board AS3722 PMIC. Signed-off-by: Tuomas Tynkkynen <redacted> --- arch/arm/boot/dts/tegra124-jetson-tk1.dts | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
index 624b0fb..0c30450 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts@@ -1453,7 +1453,7 @@ vin-ldo9-10-supply = <&vdd_5v0_sys>; vin-ldo11-supply = <&vdd_3v3_run>; - sd0 { + vdd_cpu: sd0 { regulator-name = "+VDD_CPU_AP"; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1400000>;
@@ -1662,6 +1662,12 @@ non-removable; }; + dfll at 0,70110000 { + status = "okay"; + vdd-cpu-supply = <&vdd_cpu>; + nvidia,i2c-fs-rate = <400000>; + }; + ahub at 0,70300000 { i2s at 0,70301100 { status = "okay";
--
1.8.1.5