[PATCH v6 04/10] ARM: dts: Clean up exynos5250-snow
From: Tomasz Figa <hidden>
Date: 2014-08-02 12:56:28
Also in:
linux-devicetree, linux-samsung-soc, lkml
On 02.08.2014 14:21, Tomasz Figa wrote:
On 02.08.2014 02:52, Andreas F?rber wrote:quoted
Use the new style of referencing inherited nodes and use symbolic names. Reorder one pinctrl node in GPIO order. Goal is the alignment of all exynos5250 based device trees for comparison. Suggested-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Andreas F?rber <afaerber@suse.de> --- v5 -> v6: * Split off label additions (Doug Anderson) * Fixed alphabetical order of sd3_* nodes (Doug Anderson) v4 -> v5: * Introduced labels to consistently use new referencing style (Tomasz Figa) * Use IRQ_TYPE_* constants * Use some more GPIO_ACTIVE_* v3 -> v4: Unchanged v3: New (Doug Anderson) arch/arm/boot/dts/exynos5250-snow.dts | 291 +++++++++++++++++----------------- 1 file changed, 145 insertions(+), 146 deletions(-)Reviewed-by: Tomasz Figa <redacted>
Just for convenience of other reviewers, here are actual changes done do the device tree after compiling into dtb and then back into dts:
quoted hunk ↗ jump to hunk
--- exynos5250-snow.dtb.dts 2014-08-02 14:54:15.145905921 +0200 +++ ../dtbs.post/exynos5250-snow.dtb.dts 2014-08-02 14:54:15.146905921 +0200@@ -8,6 +8,7 @@ model = "Google Snow"; chosen { + bootargs = "console=tty1"; }; aliases {@@ -829,15 +830,6 @@ phandle = <0x44>; }; - hdmi-hpd-irq { - samsung,pins = "gpx3-7"; - samsung,pin-function = <0x0>; - samsung,pin-pud = <0x1>; - samsung,pin-drv = <0x0>; - linux,phandle = <0x33>; - phandle = <0x33>; - }; - max77686-irq { samsung,pins = "gpx3-2"; samsung,pin-function = <0x0>;@@ -846,6 +838,15 @@ linux,phandle = <0xe>; phandle = <0xe>; }; + + hdmi-hpd-irq { + samsung,pins = "gpx3-7"; + samsung,pin-function = <0x0>; + samsung,pin-pud = <0x1>; + samsung,pin-drv = <0x0>; + linux,phandle = <0x33>; + phandle = <0x33>; + }; }; pinctrl at 13400000 {@@ -1703,12 +1704,12 @@ samsung,dw-mshc-ciu-div = <0x3>; samsung,dw-mshc-sdr-timing = <0x2 0x3>; samsung,dw-mshc-ddr-timing = <0x1 0x2>; + pinctrl-names = "default"; + pinctrl-0 = <0x27 0x28 0x29>; slot at 0 { reg = <0x0>; bus-width = <0x4>; - pinctrl-names = "default"; - pinctrl-0 = <0x27 0x28 0x29>; }; };
Best regards, Tomasz