On 08/01/14 01:08, Andreas F?rber wrote:
quoted hunk ↗ jump to hunk
The pinctrl properties should be on the device directly and not on the
slot sub-node.
Reported-by: Doug Anderson<dianders@chromium.org>
Cc: Jaehoon Chung<jh80.chung@samsung.com>
Signed-off-by: Andreas F?rber<afaerber@suse.de>
---
v3 -> v4: Unchanged
v3: New (Doug Anderson)
Redundant with Jaehoon Chung's general slot at 0 deprecation,
in case that hits the tree earlier.
arch/arm/boot/dts/exynos5250-snow.dts | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index f2b8c4116541..eb437f6afec1 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -240,10 +240,8 @@
*/
mmc at 12230000 {
status = "okay";
- slot at 0 {
- pinctrl-names = "default";
- pinctrl-0 =<&sd3_clk&sd3_cmd&sd3_bus4>;
- };
+ pinctrl-names = "default";
+ pinctrl-0 =<&sd3_clk&sd3_cmd&sd3_bus4>;
};
i2c at 12CD0000 {
Once I get Doug's reviewed tag on exynos5250-snow dt changes, I will
take this series :) Though Doug suggested or reported...
Thanks,
Kukjin