Am 2014-07-14 15:39, schrieb Shawn Guo:

Copy Jingchang ...

On Mon, Jul 14, 2014 at 09:48:29AM +0200, Stefan Agner wrote:

quoted

Extend the clock control for FlexCAN with the second gate which
enable the clocks in the Clock Divider (CCM_CSCDR2) register too.

Signed-off-by: Stefan Agner <stefan@agner.ch>
---
 arch/arm/mach-imx/clk-vf610.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-imx/clk-vf610.c b/arch/arm/mach-imx/clk-vf610.c
index 22dc3ee..b12b888 100644
--- a/arch/arm/mach-imx/clk-vf610.c
+++ b/arch/arm/mach-imx/clk-vf610.c

@@ -295,8 +295,10 @@ static void __init vf610_clocks_init(struct device_node *ccm_node)

 	clk[VF610_CLK_ASRC] = imx_clk_gate2("asrc", "ipg_bus", CCM_CCGR4, CCM_CCGRx_CGn(1));

-	clk[VF610_CLK_FLEXCAN0] = imx_clk_gate2("flexcan0", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(0));
-	clk[VF610_CLK_FLEXCAN1] = imx_clk_gate2("flexcan1", "ipg_bus", CCM_CCGR9, CCM_CCGRx_CGn(4));
+	clk[VF610_CLK_FLEXCAN0] = imx_clk_gate("flexcan0_en", "ipg_bus", CCM_CSCDR2, 11);
+	clk[VF610_CLK_FLEXCAN0] = imx_clk_gate2("flexcan0", "flexcan0_en", CCM_CCGR0, CCM_CCGRx_CGn(0));

I do not quite understand what "flexcan0_en" clock is and the
relationship between it and clock "flexcan0".  I do not think it's a
parent-child clock relationship.  Jingchang, do you have more info on
this?

Also when you add a new clock, you should have a new clock ID, something
like VF610_CLK_FLEXCAN0_EN.

There are two enable (gates) bits to enable the FlexCAN clocks: the
first is in the divider register, the second in the clock gate register.
For most clocks there is a divider in between, then it looks like this:

clk[VF610_CLK_ESDHC0_SEL] = imx_clk_mux("esdhc0_sel", CCM_CSCMR1, 16, 2,
esdhc_sels, 4);
clk[VF610_CLK_ESDHC0_EN] = imx_clk_gate("esdhc0_en", "esdhc0_sel",
CCM_CSCDR2, 28);
clk[VF610_CLK_ESDHC0_DIV] = imx_clk_divider("esdhc0_div", "esdhc0_en",
CCM_CSCDR2, 16, 4);
clk[VF610_CLK_ESDHC0] = imx_clk_gate2("eshc0", "esdhc0_div", CCM_CCGR7,
CCM_CCGRx_CGn(1));

However, for FlexCAN no clock selection and no divider is available,
hence its just a chain of an enable and gate register...

But yes, there should be two clock entries for this (I just asking
myself how this code actually could work, afaik the boot loader don't
touches these clocks).

--
Stefan

Shawn

quoted

+	clk[VF610_CLK_FLEXCAN1] = imx_clk_gate("flexcan1_en", "ipg_bus", CCM_CSCDR2, 12);
+	clk[VF610_CLK_FLEXCAN1] = imx_clk_gate2("flexcan1", "flexcan1_en", CCM_CCGR9, CCM_CCGRx_CGn(4));

 	clk[VF610_CLK_DMAMUX0] = imx_clk_gate2("dmamux0", "platform_bus", CCM_CCGR0, CCM_CCGRx_CGn(4));
 	clk[VF610_CLK_DMAMUX1] = imx_clk_gate2("dmamux1", "platform_bus", CCM_CCGR0, CCM_CCGRx_CGn(5));
--
2.0.1