[PATCH v3 1/5] phy: miphy365x: Add Device Tree bindings for the MiPHY365x

On Wed, 09 Jul 2014, Gabriel Fernandez wrote:

On 9 July 2014 13:41, Lee Jones [off-list ref] wrote:

quoted

The MiPHY365x is a Generic PHY which can serve various SATA or PCIe
devices. It has 2 ports which it can use for either; both SATA, both
PCIe or one of each in any configuration.

Cc: Kishon Vijay Abraham I <redacted>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Alexandre Torgue <redacted>
Signed-off-by: Lee Jones <redacted>
---
 .../devicetree/bindings/phy/phy-miphy365x.txt      | 76 ++++++++++++++++++++++
 1 file changed, 76 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/phy-miphy365x.txt

[...]

quoted

+Specifying phy control of devices
+=================================
+
+Device nodes should specify the configuration required in their "phys"
+property, containing a phandle to the phy port node and a device type.
+
+Example:
+
+#include <dt-bindings/phy/phy-miphy365x.h>
+
+       sata0: sata at fe380000 {
+               ...
+               phys      = <&miphy365x_phy MIPHY_TYPE_SATA>;
+               ...

In this example you select the type (SATA) but I don't understand how
do you select
the port (phy_port0 or phy_port1)

Right, historical typo.  Will send a v+1 as a reply, so it's easy for
Kishon to collect when he applies next week.

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog